Quick Answer: The Support Rod and Clamp Kit is a set of laboratory support parts, pictured as a long metal rod with screw clamps, a small ring fitting and rubber pads, used to hold probes, thermometers and small vessels steady beside a hotplate stirrer, bath or bench set-up.
What the Kit Is For
Many hotplate stirrers and baths have a socket or bracket for a vertical support rod, and many set-ups simply need one rod standing next to the work. The support rod and clamp kit supplies that rod with clamps that grip it, so a temperature probe can hang in a beaker at a fixed depth, or a small flask can be steadied while it stirs.
The photo shows one long rod, a clamp with a screw boss for fixing to the rod, a clamp with red jaws, a smaller fitting with a ring and a few dark rubber pads. A rigid rod and clamp hold position firmly and do not drift, which is exactly what an external temperature probe needs when a stirrer is controlling to its reading.
Rod diameter and length, and how the rod mounts to a particular stirrer, are not given in the title. Sockets differ between makes, so check them against your instrument before ordering.
Specifications
| Type | Support rod and clamp kit |
| Rod | Long straight metal rod, as pictured |
| Clamps shown | Boss-type clamp and jawed clamp, as pictured |
| Other parts | Small ring fitting and rubber pads |
| Rod size and stirrer fit | Confirm at enquiry |
Care & Handling
- Tighten clamps on the rod firmly but without forcing the screws, which can strip threads.
- Keep the rod and clamps clean and dry, and wipe off spills of acids and salt solutions.
- Fit the rubber pads between clamp jaws and glass to avoid chipping.
- Check that the rod stands vertical and the load sits over the base before stirring at speed.
Applications
- Holding an external temperature probe at a fixed depth in a stirred beaker
- Steadying a small flask or bottle on a hotplate stirrer
- Clamping a thermometer or electrode over a water bath
- Building small demonstration set-ups next to a stirrer
Why Choose LabEquip
Labs that control hotplate stirrers from an external probe need a rigid way to hold that probe in place. LabEquip lists the Stainless Steel Probe Kit and other stirrer accessories in General Lab Products; send your stirrer model through the contact page to check the rod fit.
Frequently Asked Questions
Why does an external probe need a rigid support?
If the probe moves, its reading changes and the stirrer adjusts its heating to the wrong value. A clamp on a rod keeps the probe tip at the same depth throughout the run.
Can the rod be fitted to any hotplate stirrer?
Stirrers use different sockets and rod diameters. Check the rod size and the mounting method against your instrument before ordering.
How deep should a temperature probe sit in the liquid?
Deep enough to be well covered, but clear of the stir bar and the vessel base. A probe touching the base reads closer to the plate temperature than to the liquid.
What are the rubber pads for?
They line clamp jaws so glass and probes are gripped without scratching or slipping. Replace them when they harden or crack.
Can the kit hold a heavy flask?
A rod clamp holds a moderate flask well when the rod is fixed securely. For large flasks or condensers, use a heavy-base retort stand and suitably sized clamps.
How should the parts be cleaned?
Wipe with a damp cloth and mild detergent, then dry. Do not leave metal parts wet with acids or salt solutions.
Last Updated: October 2026










Reviews
There are no reviews yet.