Search

In Stock

Cover for tube block

₹356.00

Quick Answer: The Cover for tube block is a clear rectangular lid, as pictured, that fits over the tube block of a dry bath (block heater) to keep warm or cold air around the tubes, reduce heat loss from the caps and keep dust out of the wells.

Why a Block Needs a Cover

In a dry bath the tubes are heated through the metal wells, but their caps and upper walls stand in room air. Without a cover, liquid evaporates from the sample and condenses inside the cooler cap, which can change concentrations in small volumes. The cover for tube block traps a warm layer of air above the block, so the tube tops stay closer to the block temperature.

The pictured cover is a simple clear, open-bottomed box with straight sides. Being transparent, it shows labels and which positions are filled without being lifted. It suits tubes that fit fully within its height; taller tubes need a cover with holes or more headroom.

Which block the cover fits is not given in the title. LabEquip lists the Tube Block and a support and cover for dry bath with holes for taller tubes, so compare footprints before ordering.

Applications

  • Heat steps on microtubes in a dry bath, such as enzyme inactivation
  • Incubations where condensation in the caps would change small volumes
  • Cold work on a pre-chilled block, slowing warming from room air
  • Keeping dust off the block between uses

Care & Handling

  • Clean the cover for tube block with mild soapy water; solvents can cloud or crack clear plastics.
  • Check the material’s temperature limit before using the cover on a block set high.
  • Let the cover cool before washing it, to avoid stress cracks.
  • Store it on its rim so the top does not get scratched.

Specifications

Type Lid for dry bath tube blocks
Appearance Clear, rectangular, open-bottomed, as pictured
Function Keeps warm or cold air over the tubes; keeps dust out
Headroom For tubes that fit fully under the cover
Block fit and material rating Confirm at enquiry

Why Choose LabEquip

Molecular biology and clinical labs cover dry-bath blocks to keep small sample volumes stable during heat steps. LabEquip lists blocks, covers and dry baths in General Lab Products, and confirms which cover fits which block through the contact page.

Frequently Asked Questions

Why does liquid collect in tube caps during heating?

Vapour from the warm sample condenses on the cooler cap. Covering the block keeps the caps warmer, so less liquid leaves the sample during the heat step.

Can I use the cover for cold work?

Yes. On a chilled block it slows the inflow of warm room air and can reduce frost and condensation on the tubes.

Will the cover fit any tube block?

Covers are made to the footprint of particular blocks. Compare the cover’s inside dimensions with your block or heater before ordering.

What if my tubes are taller than the cover?

Use a cover with holes in the top, through which tall tubes can stand, or a deeper cover. A cover pressing on tube caps can lift tubes out of their wells.

Is the cover heat resistant?

Clear plastics vary in the heat they tolerate, and the listing does not name this one. Find out its limit before using the cover at high block temperatures.

How should it be cleaned?

Use warm water with mild detergent and a soft cloth, rinse and let it air dry. Avoid alcohol or acetone unless the plastic is known to resist them.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)