Search

In Stock

Together Ring Sphere

Ensemble anneau sphère (dit de 'S Gravesande), Standardized Ring-to-Sphere Tolerance Enables the Evaluation of material threshold points; students can empirically determine the specific temperature delta required for expansion-induced occlusion.

Impact-Resistant Chain and Mounting Support facilitant la mise en oeuvre, Supports the Application of thermodynamics principles in high-occupancy laboratory environments by ensuring hardware longevity through repeated heating/cooling cycles.

Insulated Safety Grips adhere to vocational safety protocols, allowing for the safe Application of Bunsen burners or portable heat sources during experimental procedures.

₹1,632.00

Quick Answer: The ring and sphere set demonstrates the expansion of solids on heating: a metal sphere that passes through a matching ring when both are cold will not pass once the sphere is heated. It is used to introduce linear and volume expansion and to show how engineers use expansion to join machine parts.

From a Simple Test to Expansion Coefficients

For a solid heated through a temperature change, every length increases in proportion: the change in length equals alpha times the original length times the temperature change, where alpha is the linear expansion coefficient of the material. A sphere grows in diameter by this rule, and its volume grows by roughly three times the fraction, because volume depends on the cube of the diameter. That is why the volume coefficient of an isotropic solid is close to three times alpha.

A worked example shows the size of the effect. Taking a coefficient of about 0.000019 per kelvin, typical of brass, a sphere 25 mm across heated by 300 K grows by about 0.14 mm in diameter and by roughly 1.7 per cent in volume. The numbers are illustrative rather than a description of this set, but they explain why a close fit between ring and sphere is needed for a clear result.

Specifications

Item Ring and sphere set for expansion of solids
Principle Linear and volume expansion of metals on heating
Demonstrations Heated sphere blocked by the ring; heated ring admits the cold sphere
Heat source Flame from a Bunsen or spirit burner
Metal, sizes and mounting Confirm at enquiry

Expansion at Work

Engineers use the same effect deliberately. In a shrink fit, an outer part such as a gear or bearing race is heated so that its hole enlarges, slipped over a shaft and left to cool, gripping the shaft tightly. The ring and sphere set lets students see the principle in miniature: heat the ring instead of the sphere and the cold sphere passes through freely, just as the heated gear slides onto its shaft.

Care & Handling

  • Hold the parts by their handles or with tongs while hot
  • Rotate the sphere in the flame so it heats evenly
  • Place hot parts on a heat-resistant mat to cool
  • Keep the contact surfaces clean and undamaged so the cold fit stays reliable

Teaching Applications

  • Introducing linear and volume expansion coefficients
  • Estimating an expansion in a worked calculation
  • Explaining shrink fits, rail gaps and expansion joints
  • Comparing predictions for heating the sphere and heating the ring

Why Choose LabEquip

Teachers who want to move from a yes-or-no demonstration to a calculation pick the ring and sphere set, since the close fit makes a tiny expansion visible and invites an estimate. It pairs with the classic ‘s Gravesande’s ring and with the expansion of solids and liquids apparatus for measured coefficients; more physics lab equipment is listed in the category.

Frequently Asked Questions

Why is the volume expansion coefficient about three times the linear one?

Volume is the product of three lengths. If each grows by a small fraction, the volume grows by almost three times that fraction, so for an isotropic solid the volume coefficient is close to three times the linear coefficient.

Does a hollow sphere expand differently from a solid one?

No. A hollow sphere made of the same metal expands to the same outside diameter for the same temperature rise, because every part of the shell scales up by the same fraction.

What is a shrink fit?

It is a way of joining parts by heating the outer part so that its hole enlarges, fitting it over the inner part and letting it cool. As it contracts it grips tightly, without screws or adhesives.

Why might the sphere pass through again before it feels cool?

The fit only needs the diameter to fall back by a tiny amount. The sphere can still be uncomfortably hot when it has contracted enough to pass, so always handle it as hot.

Can the set compare different metals?

Only if spheres or rings of different metals are available. With a single pair the demonstration shows that expansion happens, while measured coefficients for different metals need a linear expansion apparatus.

Where else must engineers allow for expansion?

Railway lines, bridges, pipelines and concrete slabs all include gaps, sliding joints or loops so that they can expand on hot days without buckling or cracking.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)