Quick Answer: A stroboscope disc is a flat disc printed or cut with evenly spaced radial markings. When the disc spins under flashing or flickering light, the markings can appear to stand still, creep forwards or run backwards, which makes it a simple way to teach the stroboscopic effect and to check a rotation speed.
When the Pattern Stands Still
Suppose a ring on the disc carries N equally spaced marks and the disc turns n times a second under light that flashes f times a second. Between two flashes each mark moves on by n/f of a turn. If that movement is exactly one mark spacing, 1/N of a turn, every mark lands where its neighbour was and the ring looks frozen. The condition is nN = f, or any whole-number multiple of it.
If the disc turns slightly faster than this, each mark gets a little beyond its neighbour’s old position at every flash and the pattern seems to creep forwards slowly; slightly slower, and it seems to drift backwards. The same disc therefore shows freezing, slow motion and apparent reversal with one light source.
A Speed Check Under Mains Lighting
A filament lamp on 50 Hz mains flickers 100 times a second, and that flicker is enough to use the disc without a separate stroboscope. For a ring to stand still at a chosen speed, it needs N = 100 × 60 ÷ rpm marks. At 33⅓ rpm the answer comes to 180 marks, which is why record-player speed discs carried a ring of 180 bars; on 60 Hz mains the figure becomes 216. A disc with several rings of different mark counts tells you the speed by showing which ring stands still. Many modern LED lamps give an almost steady light, so with them the effect is weak or absent and a stroboscope should be used instead.
Specifications
| Item | Disc with evenly spaced radial markings |
| Principle | Stroboscopic effect under periodic light |
| Light sources used | Stroboscope, or a lamp flickering at twice the mains frequency |
| Stand-still condition | Marks per ring × revolutions per second = flashes per second |
| Ring pattern, diameter and mounting | Confirm at enquiry |
Applications
- Introducing the stroboscopic effect before students use a stroboscope on real machines
- Showing apparent freezing, slow forward motion and apparent reversal
- Checking the speed of a motor or turntable against mains-lamp flicker
- Practising the stand-still method of frequency measurement
Care & Handling
- Keep the printed face clean and dry; smudged or faded marks blur the effect.
- Mount the disc centrally on its spindle so it runs without wobble.
- Store it flat, away from heat, so it does not warp.
- Keep fingers clear of the edge while the disc is spinning on a motor.
Why Choose LabEquip
Physics teachers often start a lesson on stroboscopes with a disc because the effect is easy to see and needs only a light source and something to turn it. LabEquip lists the stroboscope disc in its physics lab equipment range together with an LED manual stroboscope for lighting it. Ring patterns and mounting can be discussed through the contact page.
Frequently Asked Questions
Why do the marks appear to stand still?
The light flashes at just the moment each mark has moved into the place where the next mark was. Every flash shows the same pattern in the same position, so the eye sees a still ring even though the disc is turning.
Why does the pattern sometimes drift backwards?
When the disc turns slightly too slowly for the stand-still condition, each mark is caught a little short of its neighbour’s previous position. The eye links these positions into a slow backward motion.
How many marks are needed to check a speed under mains lighting?
On 50 Hz mains, divide 6000 by the speed in rpm; on 60 Hz mains, divide 7200. For 33⅓ rpm that gives 180 marks on 50 Hz mains and 216 marks on 60 Hz mains.
How is the disc turned?
It is normally mounted centrally on a motor spindle, a turntable or an axle turned by hand. A motor gives a steadier speed, which keeps the pattern still for longer.
Does the disc work under LED room lights?
Often not. Many LED lamps use drivers that smooth their output, so there is little flicker for the disc to respond to. A stroboscope gives a reliable flashing source in any room.
How is a stroboscope disc different from a Newton’s colour disc?
A Newton’s colour disc relies on persistence of vision to blend coloured sectors into near-white under steady light. A stroboscope disc relies on intermittent light to sample a moving pattern, so it looks still or slow.
Last Updated: October 2026










Reviews
There are no reviews yet.