Search

In Stock

Rotating Platform For Studying Angular Momentum

Plateforme rotative d'étude du moment cinétique, Non-Slip High-Traction Surface Ensures laboratory participant safety during the physical Application of the Conservation of Angular Momentum principle through mass redistribution.

Ensemble complet avec roue et accessoires, High-Mass Inertial Base Design enables the technical Evaluation of torque-free systems by minimizing parasitic vibration and lateral drift during high-cadence undergraduate trials.

Integrated Accessory Coupling supports the Synthesis of complex rotational data when utilized with handheld masses or gyroscopic stabilizers.

₹10,230.00

Quick Answer: A rotating platform for angular momentum is a flat platform mounted on a low-friction bearing so that it turns freely about a vertical axis, with a demonstrator standing or sitting on it. The rotating platform for angular momentum shows conservation of angular momentum when the demonstrator pulls masses inwards or turns a spinning wheel.

Pulling the Arms In

The classic demonstration on the rotating platform starts with the demonstrator holding a dumbbell in each hand, arms stretched out, while a helper sets the platform turning slowly. When the arms are pulled in, the spin speeds up noticeably; when they are pushed out again, it slows. No outside twist acts, because the bearing turns freely, so the angular momentum L = Iω stays constant. Moving the masses inwards reduces the moment of inertia I, and the angular velocity ω must rise to compensate.

The effect is large because I depends on the square of the distance from the axis. Halving the distance of the dumbbells from the axis cuts their contribution to I to a quarter, which is why a modest arm movement makes such a visible difference.

The Spinning Wheel Experiment

A bicycle wheel with handles gives the second demonstration. Standing still on the rotating platform, the demonstrator holds the wheel spinning with its axle vertical, then turns it upside down. The platform and person begin to rotate in the direction the wheel was originally spinning. Total angular momentum about the vertical axis was L before the flip; afterwards the wheel carries −L, so the person and platform must carry +2L.

Turning the wheel back reverses the effect and the platform stops. The demonstration links directly to how satellites and spacecraft change orientation with reaction wheels.

Demonstrations

  • Spin rate rising and falling as masses are pulled in and pushed out
  • Reaction rotation when a spinning bicycle wheel is turned over
  • Introducing moment of inertia and its dependence on distance from the axis
  • Discussing how skaters, divers and spacecraft control their rotation

Specifications

Product Freely rotating platform on a low-friction bearing
Axis Vertical
Principle shown Conservation of angular momentum, L = Iω
Used with Hand-held dumbbells or masses, a bicycle wheel with handles
Platform size and rated load Confirm at enquiry

Care & Handling

  • Confirm the rated load before anyone stands on the platform, and keep within it
  • Use spotters on both sides, start at low speed and stop the platform before the demonstrator steps off
  • Keep the floor around the platform clear and the masses gripped securely
  • Keep the bearing clean and check periodically that the platform turns smoothly and quietly

Why Choose LabEquip

The rotating platform is bought mostly for lecture demonstrations in colleges and senior school physics departments, where one memorable experiment introduces rotational dynamics. LabEquip can pair it with a moment of inertia apparatus for the quantitative follow-up and other physics lab equipment; contact LabEquip to confirm the load rating you need.

Frequently Asked Questions

Why does the person spin faster when the arms are pulled in?

With no external torque, angular momentum Iω stays constant. Pulling the masses closer to the axis reduces the moment of inertia I, so the angular velocity ω has to increase in the same proportion.

Where does the extra rotational energy come from?

Rotational kinetic energy equals L²/2I, so with L fixed it rises as I falls. The extra energy comes from the work the demonstrator’s arms do pulling the masses inwards against their tendency to fly outwards.

What happens when a spinning bicycle wheel is turned over on the platform?

The wheel’s angular momentum reverses, so to keep the total unchanged the person and platform start rotating in the wheel’s original direction, carrying twice the wheel’s angular momentum.

Does friction in the bearing spoil the demonstration?

A little friction slowly brings the platform to rest but does not hide the effect, which happens within a second or two. A smooth, clean bearing keeps the spin going long enough for several arm movements.

How can the change in spin rate be measured?

Count the turns in a fixed time with arms out and with arms in, or film the platform from above with a marker on its rim. A phone gyroscope app held by the demonstrator also records angular velocity directly.

How should the demonstration be run safely?

Check the load rating, keep speeds low, have a spotter on each side and clear the area. The demonstrator steps on and off only when the platform is stationary and keeps a firm grip on the masses.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)