Quick Answer: This simple and compound pendulum kit lets students set up two kinds of pendulum side by side: a small bob on a light thread, which behaves almost like a point mass, and a rigid body swinging about a pivot, known as a compound or physical pendulum. Comparing the two is a standard route to measuring g and to the idea of moment of inertia.
Two Pendulums, Two Models
The simple pendulum is the idealised case. All of its mass is treated as sitting at one point a distance L below the support, so for small swings the period is T = 2π√(L/g) and depends neither on the mass of the bob nor, to a good approximation, on the amplitude. Students time a run of oscillations, divide by the count, and plot T² against L; the gradient of that straight line is 4π²/g.
A compound pendulum spreads its mass along a rigid body, so the moment of inertia about the pivot, I, takes the place of mL². Its period becomes T = 2π√(I/(mgd)), where d is the distance from the pivot to the centre of mass. The result is often expressed as an equivalent length, I/(md): the length of thread pendulum that would keep time with the rigid one.
Running the Comparison
With the rigid pendulum the position of the mass along the rod matters in a different way. Where the rod carries a movable mass, sliding it to new positions and timing the swing at each one shows the period changing with how the mass is distributed, and the results can be set beside a thread pendulum whose bob hangs at the same distance from the pivot.
Damping is the second half of the practical. Fixing a light disc or paddle to the moving mass makes the amplitude shrink swing by swing, and the time between swings becomes a pseudo-period, very close to the free period when damping is light. With much stronger damping the pendulum creeps back to rest without overshooting; the boundary between the two behaviours is critical damping, the setting used in moving-coil meters.
Specifications
| Product | Pendulum kit for simple and compound (physical) pendulum work |
| Simple pendulum | Bob on a light thread from a fixed support |
| Compound pendulum | Rigid body swung about a pivot |
| Quantities found | g, equivalent length, pseudo-period, damping regime |
| Used with | Stand and clamp, stopwatch or light gate, metre rule |
| Kit contents and dimensions | Confirm at enquiry |
Practical Work with the Kit
- Finding g from the gradient of a T² against L graph for the thread pendulum
- Timing the rigid pendulum with its mass at different positions along the rod
- Comparing free, lightly damped and critically damped motion
- Comparing the measured equivalent length of the rigid pendulum with its actual length
Care & Handling
- Clamp the support stand firmly to the bench, or weight its base, so the stand does not sway with the pendulum
- Keep threads untangled and replace any that have stretched or frayed, since the length must stay constant during a run
- Check that pivot edges or holes are clean and undamaged, because a worn pivot adds friction and shifts the period
Why Choose LabEquip
Physics teachers who want both pendulum models in one practical buy this kit for senior-school, pre-university and first-year college mechanics. LabEquip can pair it with Pohl’s rotary pendulum for forced oscillation and resonance work, as part of the wider mechanics lab equipment range. Send your class size and syllabus through the LabEquip contact page.
Frequently Asked Questions
What is the difference between a simple and a compound pendulum?
A simple pendulum treats the bob as a point mass on a weightless thread. A compound, or physical, pendulum is a rigid body whose mass is spread out, so its period depends on its moment of inertia about the pivot and on the distance from the pivot to its centre of mass.
Why does the period of a simple pendulum not depend on the mass of the bob?
Both the restoring force and the inertia of the bob are proportional to its mass, so the mass cancels in the equation of motion. A heavier bob still helps in practice, because air resistance has a smaller effect on it.
How should students time the thread pendulum?
Keep the swing to a few degrees, time 20 or more oscillations and divide by the count, and start the stopwatch as the bob passes the lowest point, where it moves fastest. Larger swings make the period measurably longer.
What is the equivalent length of a compound pendulum?
It is the length of a simple pendulum with the same period. It equals I divided by md, where I is the moment of inertia about the pivot, m the mass and d the distance from the pivot to the centre of mass.
What is a pseudo-period?
When a pendulum is damped its motion is no longer strictly periodic, because the amplitude shrinks each swing. The time between successive passes in the same direction is called the pseudo-period; with light damping it is very close to the free period.
Which parts come in the kit?
The listing names a kit for both pendulum types but does not list its parts. Tell us which stand, clamp and timing method you already have, and we will confirm what the kit includes and what you may still need.
Last Updated: October 2026










Reviews
There are no reviews yet.