Quick Answer: The universal electrode support is a white plastic platform with openings, orange clamping parts and a thumbscrew, shown holding two black graphite rods. It rests across the top of a beaker and holds the electrodes upright at a chosen spacing, leaving openings for a thermometer or probe.
One Support for Many Electrode Types
Electrochemistry practicals use electrodes of very different shapes: round graphite rods, flat metal plates, thin wires. Separate holders for each become a drawer full of odds and ends. A universal electrode support replaces them with one platform whose clamps accept rods and plates alike, so the same beaker set-up serves electrolysis one week and simple cells the next.
Holding the electrodes from above at a fixed spacing also means the distance between them can be kept the same from run to run, or changed deliberately to show that a wider gap raises the resistance of the solution and lowers the current.
Setting It Up
Place the support across the beaker, slide each electrode into an opening and lock it at the depth you want with its clamp. The thumbscrew pictured on the support tightens the fitting. Connect leads to the tops of the electrodes, above the support, so all metal connections stay dry. Spare openings can take a thermometer, a pH probe or a stirring rod.
Specifications
| Product | Universal electrode support |
| Shown in photograph | White plastic platform with openings, orange clamping parts and thumbscrew, holding two graphite rods |
| Mounting | Across the top of a beaker |
| Holds | Rod and plate electrodes at a set spacing |
| Extra openings | For a thermometer, probe or stirrer, as pictured |
| Beaker sizes it spans | Confirm at enquiry |
Practical Uses
- Holding graphite rods for electrolysis of aqueous solutions in a beaker
- Holding two metal plates at a fixed gap in simple cell experiments
- Investigating how electrode spacing affects current
- Combining electrodes with a thermometer to follow temperature during electrolysis
Care & Handling
- Rinse the support after use, especially the clamps, to stop salt crystals forming
- Keep electrical connections above the platform and away from the liquid
- Do not overtighten clamps on graphite rods, which are brittle
- Store the support flat so it does not warp
Why Choose LabEquip
Teachers buy a universal support so that one beaker set-up works with rods, plates and probes alike. LabEquip supplies it with graphite electrodes, electrode holders and other physics lab equipment; contact LabEquip to check it suits your beakers.
Frequently Asked Questions
What electrodes can the support hold?
It is designed to hold rods such as graphite electrodes and flat metal plates, clamped at the depth you choose.
How does it fit on a beaker?
The platform rests across the top of the beaker. The range of beaker sizes it spans can be confirmed at enquiry.
Why does a fixed spacing help?
The resistance of the solution depends on the distance between the electrodes. Fixed spacing keeps the current comparable between runs.
Can a thermometer be used at the same time?
Yes. The extra openings in the platform can take a thermometer or probe beside the electrodes.
How is the support different from rim-mounted electrode holders?
Rim holders clip to the edge, one per electrode. The universal support spans the beaker and holds several items in one platform.
How should it be cleaned?
Rinse it in clean water after use, paying attention to the clamps, and let it dry before storing.
Last Updated: October 2026










Reviews
There are no reviews yet.