Quick Answer: The Gloves Kevlar Bull Type are Kevlar gloves: knitted gloves of para-aramid fibre, which is valued for cut resistance and for not melting when heated. The listing photograph shows a cream knitted glove with a yellow cuff edge, for handling sharp sheet metal, broken glass and warm items.
Why Para-Aramid Fibre
Kevlar is a trade name for a para-aramid fibre, a synthetic fibre that is very strong for its weight. Knitted into a glove, it resists slicing by sharp edges far better than cotton, and as a general property of aramids it does not melt when heated but chars at high temperatures. That combination explains why such gloves are common in sheet metal work, glass handling and around warm equipment.
The protection has clear limits. A knitted glove is not puncture-proof, so needles, wire ends and fine points can pass between the loops. It is neither waterproof nor chemical-resistant, since liquids soak straight through, and damp gloves pass heat quickly. The level of cut and heat protection depends on yarn, knit gauge and thickness, none of which the listing gives, and the title does not explain what ‘Bull Type’ refers to, so ask about the construction if a particular style is expected.
Knitted gloves must never be worn at rotating machinery such as drills, lathes and grinders, where a loop can be caught and pull the hand in. For cutting and filing sheet metal, clamp the work in a bench vice rather than holding it in the gloved hand.
Handling Jobs They Suit
- Handling sheet metal and freshly cut sections in fabrication workshops.
- Clearing broken glassware with a dustpan and brush, and sorting glass for recycling.
- Moving warm glassware or metal parts for short periods.
- Changing blades and handling edged tools in technology workshops.
Use and Care
- Keep the gloves away from drills, lathes, grinders and any other rotating machinery.
- Wash at a low temperature as directed and air dry; bleach weakens aramid fibre.
- Check for cut or thinned areas, especially at the fingertips and between thumb and forefinger, and replace worn gloves.
- Do not use them for liquids or chemicals, since they are not a barrier.
Specifications
| Type | Knitted cut-resistant gloves |
| Fibre | Para-aramid (Kevlar) |
| Appearance in photograph | Cream knit with yellow cuff edge |
| Protects against | Cuts from sharp edges; brief contact with warm items |
| Cut level, heat rating and sizes | Confirm at enquiry |
Why Choose LabEquip
Engineering workshops, glass-handling stores and estates teams buy knitted aramid gloves for jobs involving sharp edges. LabEquip lists them in General Lab Products, and cut or heat levels and sizes can be discussed through the contact page.
Frequently Asked Questions
Are Kevlar gloves cut-proof?
No glove is cut-proof. Para-aramid gloves resist slicing much better than cotton or leather of similar thickness, but a hard, sharp stroke or a sawing action can still cut through. Keep good technique and use tools rather than hands where you can.
Do Kevlar gloves protect against needles and punctures?
Not reliably. A knitted fabric has small openings between the loops, and fine points can pass through them. Needlestick hazards need gloves designed specifically for puncture resistance.
Can I handle hot glassware with them?
Aramid fibre does not melt, so the gloves are used for brief contact with warm items. How hot and for how long depends on the knit thickness, and damp gloves pass heat quickly, so use tongs or heat-resistant mitts for very hot items.
Why must knitted gloves not be used on lathes or drills?
A rotating chuck, spindle or bit can catch the knitted loops and pull the glove, and the hand inside it, into the machine. Keep hands clear and gloves off when operating rotating machinery.
Can Kevlar gloves be washed?
Usually yes, by gentle washing at a low temperature and air drying, but avoid bleach, which weakens aramid fibre. Follow the washing instructions supplied with the gloves.
Are Kevlar gloves suitable for chemicals?
No. Liquids soak straight through a knitted glove and hold the chemical against the skin. For chemical handling, use chemical resistant gloves, or a chemical glove worn over a cut-resistant liner where both hazards exist.
Last Updated: September 2026










Reviews
There are no reviews yet.