Quick Answer: The Flip Up Replaceable Lens Goggles are flip up welding goggles with a rectangular dark filter in a hinged front that lifts to reveal a clear lens behind it, so the wearer can inspect the work with the eyes still protected, and with lenses that can be changed when pitted or scratched.
Weld, Lift, Inspect
In gas welding, brazing and cutting, the operator needs a dark filter while the flame is working but clear vision to set up, chip, brush and inspect the joint. With fixed dark goggles that means taking them off, which leaves the eyes open to chips and spatter. Here the filter sits in a front frame hinged at the top, and lifting it leaves a clear lens that still guards against particles.
The body shown in the listing photograph is a moulded one-piece frame with a strap, carrying the rectangular filter housing at the front. Because the filter and the clear lens are held in frames rather than moulded in, each can be replaced when spatter pits it or scratches make vision poor. Replacement filter plates are sold by shade number, so the shade can be matched to the process.
The listing does not describe the ventilation or the shade supplied, so check the shade number before use. For round eyecup goggles with fixed dark lenses, see the Bocal type goggles; flip up welding goggles suit students who switch constantly between welding and inspecting.
Specifications
| Type | Welding goggles with flip-up filter front |
| Filter | Rectangular dark filter in a hinged frame |
| Behind the filter | Clear lens for inspection |
| Lenses | Replaceable |
| Shade number supplied | Confirm at enquiry |
Workshop Uses
- Gas welding, brazing and cutting in ITI and polytechnic workshops.
- Soldering and brazing demonstrations in engineering labs.
- Chipping slag and wire-brushing joints between runs, with the filter raised.
- Occasional cutting and brazing repairs by maintenance teams.
Care & Handling
- Raise the filter only after the flame is off the work, never while looking at the flame.
- Change the clear lens once spatter pits it, since it also shields the filter behind it.
- Wipe the lenses with a soft cloth; never grind or scrape spatter off.
- Store the goggles with the front closed, in a bag, away from grinding dust.
Why Choose LabEquip
ITIs, polytechnics and engineering colleges buy flip-up goggles for gas welding and brazing practicals, where a lifted filter saves students from taking their eye protection off. LabEquip lists them in General Lab Products, and shade requirements can be raised through the contact page.
Frequently Asked Questions
Why choose flip-up goggles over fixed dark goggles?
With a flip-up front the eyes stay protected while the filter is raised for chipping, brushing and inspecting the joint. With fixed dark goggles the wearer tends to take them off for these jobs, which exposes the eyes to flying slag and particles.
Which lenses can be replaced?
In goggles of this design, the dark filter plate and the clear lens are held in frames and can be changed when pitted or scratched. Measure the lens size when buying replacements so that they fit the frame.
Which shade should be used for gas welding?
Gas welding and brazing generally use moderate shades, with darker shades for heavier work and for cutting thick metal. The correct shade lets you see the weld pool clearly without glare; if your eyes feel strained, move to a darker shade.
Can these goggles be used for arc welding?
No. Arc welding produces intense ultraviolet radiation that burns the face and neck as well as the eyes, so it needs a welding helmet or hand shield fitted with the correct filter.
Why do welding goggles often have side vents?
Vents let air move through the goggle, which reduces fogging from sweat and heat. They are shaped so that sparks and bright light cannot pass straight through to the eyes.
How should spatter on the lens be dealt with?
Do not scrape or grind it off, which scratches the lens further. Once spatter or pitting interferes with vision, fit a new clear lens or filter plate.
Last Updated: September 2026










Reviews
There are no reviews yet.