Search

In Stock

Bocal Type Goggles

Optical Engineering: Features a high-impact Polycarbonate (PC) lens with a Grade 1 optical clarity rating and integrated anti-fog coating, ensuring distortion-free vision and 99.9% UV filtration during prolonged hazardous exposure.

Fluid Dynamics & Comfort: Engineered with an ergonomic Soft-PVC chassis featuring specialized indirect ventilation ports that prevent liquid ingress while facilitating constant airflow to eliminate internal heat buildup and moisture condensation.

₹850.00

Quick Answer: The Bocal Type Goggles are cup-style safety goggles; the listing photograph shows two round eyecups joined by a bridge, fitted with dark filter lenses and held by an elastic strap, a pattern used to shield the eyes from glare and sparks in gas welding, brazing and furnace work.

The Eyecup Goggle Pattern

Eyecup goggles cover each eye with its own round cup, which rests around the eye socket and screens out light and sparks from the front and sides. The bridge between the cups is usually adjustable, and an elastic headband keeps the goggles in place when the wearer bends over the work. The design has long been used for oxy-acetylene welding and cutting, brazing and soldering, where a dark lens is needed but a full helmet is not.

The darkness of a filter lens is given by its shade number, and the right shade depends on the process and the brightness of the flame. The listing photograph shows dark lenses, but their shade is not stated, so check that it suits the task before use. Gas welding and brazing generally use moderate shades, while electric arc welding is far brighter and gives off strong ultraviolet that burns exposed skin, so it calls for a welding helmet rather than goggles.

Bocal type goggles with dark lenses are for glare, not for chemical splashes, and should never be worn for ordinary bench work, where they only reduce vision. For work that alternates between welding and inspecting the joint, the flip up replaceable lens goggles let the dark filter be lifted without taking the goggles off.

Where Cup Goggles Are Worn

  • Oxy-acetylene welding, cutting and brazing in engineering and ITI workshops.
  • Soldering and brazing demonstrations in technical education.
  • Viewing furnaces, kilns and melts where glare is intense.

Care & Handling

  • Inspect the lenses for cracks, and replace lenses that are scratched or pitted by spatter.
  • Wash the eyecups with mild soap and water and let them dry before storing.
  • Store away from heat and direct sunlight, which harden the strap and cups over time.
  • Keep them in a bag or case, so the lenses are not scratched in a toolbox.

Specifications

Type Eyecup (cup-style) goggles
Lenses Dark filter lenses (listing photograph)
Fitting Bridge between the cups, elastic headband
Typical tasks Gas welding, brazing, cutting, furnace viewing
Shade number of lenses Confirm at enquiry

Why Choose LabEquip

Engineering colleges, ITIs, polytechnic workshops and maintenance departments buy eyecup goggles like these for students learning gas welding and brazing. LabEquip lists them in General Lab Products; send details of the welding or cutting process through the contact page to settle a suitable lens shade.

Frequently Asked Questions

What are Bocal type goggles used for?

Goggles of this cup-style pattern with dark lenses are used where bright light and sparks are the hazard: gas welding, cutting, brazing and looking into furnaces. They are not intended for chemical splash protection in ordinary laboratory work.

Can I use these goggles for arc welding?

No. Electric arc welding gives off intense ultraviolet and visible light that needs a dark shade and full face protection, because the radiation also burns the skin of the face and neck. Use a welding helmet or hand shield with the correct filter.

How do I know if the lens shade is right?

The correct shade depends on the process and the brightness of the flame. You should be able to see the weld pool clearly without glare or eye strain; if the light is uncomfortable a darker shade is needed, and if the work cannot be seen a lighter one.

Can the goggles be worn over spectacles?

Cup-style goggles sit close around each eye and usually do not fit over spectacles. Wearers of glasses need goggles designed to go over them, or a welding helmet with room for spectacles.

How should the goggles be adjusted?

Set the bridge so each cup is centred over an eye, then tighten the headband until the cups rest evenly around the eye sockets without pressing hard. Light leaking in at the sides means the fit needs adjusting.

Do the dark lenses protect against sparks?

The cups and lenses shield the eyes from sparks and small hot particles thrown towards the face, but they do not protect the rest of the face. Wear flame-resistant clothing and gloves, and a face shield or helmet where needed.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)