Search

In Stock

Plastic Stopper

Standardized Tapered Geometry: Precision-molded with a specific 1:10 taper ratio to ensure a friction-fit, airtight seal within standard ground-glass joints without the risk of seizing or material bonding.

Biologically Inert Polypropylene: Constructed from high-purity, autoclavable resins that maintain structural integrity and chemical resistance during repeated exposure to aggressive acids, alkalis, and organic solvents.

₹125.00

Quick Answer: A plastic stopper is a moulded closure with a tapered shank that fits into the ground socket of a flask or bottle. The listing photo shows white stoppers with lobed grip heads and a red top marked NS 19/26, the way stoppers for standard taper joints are labelled by size.

Closing a Joint Without Glass on Glass

Flasks with interchangeable ground joints are normally closed with glass stoppers, which seal well but can seize. Alkali solutions, dried sugar syrups and salts crystallising in the joint are all known for freezing a glass stopper in place. A stopper moulded from polypropylene or polyethylene slips into the same socket, seals by the slight give of the plastic, needs no grease and rarely sticks.

In the listing photo the shank carries raised rings, which press against the ground surface to improve the seal, and the knurled, three-lobed head gives a firm grip.

Typical partners are interchangeable joint glassware and the glass volumetric flask, whose neck socket is usually closed with a stopper of this kind.

Applications

  • Closing volumetric flasks while a standard solution is mixed by inversion
  • Sealing round bottom flasks with ground necks between steps of a synthesis
  • Stoppering flasks that hold sodium hydroxide solution, which can seize a glass stopper
  • Replacing lost or broken glass stoppers in a set of jointed glassware

Care & Handling

  • Push and turn the stopper gently into place; never force a stopper into a socket of a different size.
  • Keep these stoppers away from heat, and remove them before a flask is heated or placed under vacuum.
  • Rinse after use and let them dry apart from the glassware, then store them with the flasks they fit.

Specifications

Item Moulded stopper with tapered shank for ground joint sockets
Head Knurled, lobed grip head (listing photo)
Size marking NS joint size moulded on top; photo shows NS 19/26
Advantage Seals without grease and resists seizing

Why Choose LabEquip

Chemistry labs with sets of jointed glassware keep moulded stoppers on hand to replace lost glass ones and to close flasks that tend to seize. LabEquip lists them in its chemistry lab equipment range; send your joint sizes through the contact page.

Related Products

Frequently Asked Questions

What does NS 19/26 on the plastic stopper mean?

It is the standard joint size: 19 is the approximate diameter in millimetres at the wide end of the ground taper and 26 is the length of the ground part. The listing photo shows a plastic stopper marked NS 19/26, which fits any socket of the same size.

Why choose a plastic stopper over a glass stopper for a ground socket?

A plastic stopper seals by the slight give of the plastic, needs no grease and rarely sticks. Glass stoppers can seize in sockets with alkali solutions, sugar syrups or crystallising salts, so a plastic stopper is the practical choice for those flasks.

Is a plastic joint stopper airtight?

It gives a good seal for storage and for keeping out dust and moisture, helped by the raised rings on the shank in the listing photo. For vacuum work or long-term storage of volatile solvents, a greased glass stopper or a dedicated sealed closure is more reliable.

Will a joint stopper fit an ordinary reagent bottle?

Only if the bottle neck is ground to the same standard joint size. Many reagent bottles have their own neck sizes or screw threads, so a joint stopper is meant for flasks and apparatus with standard ground sockets.

Which liquids should be kept away from plastic stoppers?

Plastic stoppers made of polyolefins resist water, most acids and alkalis, but some organic solvents such as chlorinated and aromatic solvents can swell them over time. Use glass stoppers for solvent storage.

Can plastic joint stoppers be autoclaved?

Stoppers moulded from polypropylene can generally be autoclaved, while polyethylene ones may soften. If autoclaving matters, check the resin code on the stopper or packaging and loosen it in the socket during the cycle.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)