Quick Answer: The Aspirator Bottle, Deluxe is a storage bottle with an outlet near its base, normally fitted with a stopcock or tap, so liquid can be drawn off by gravity without lifting or pouring. Labs keep it on the bench as a reservoir for distilled water, buffers, rinse solutions and prepared media.
How a Bottom-Outlet Bottle Works
An aspirator bottle is filled through its wide neck and emptied through a short side tube, the tubulation, moulded or fused just above the base. A tap on that outlet opens and closes the flow, so a technician can fill a wash bottle, measuring cylinder or beaker straight from the shelf. Because nothing is dipped into the liquid, the contents stay cleaner than a stock bottle that is opened and poured from all day.
The name recalls an older job. When liquid runs out of the outlet, air or gas is drawn in through the neck, and bottles of this kind were once used to pull gas slowly through absorption apparatus. Today the everyday use is dispensing, and the same vessel serves as a gravity reservoir feeding tubing to a rinse point or a piece of apparatus.
‘Deluxe’ is the range name in the title; the material (glass or heavy-duty plastic), the capacity and the type of tap are not stated. Set the bottle on a shelf or stand above the vessel being filled, since the flow rate depends on the height of liquid above the outlet. For bulk stocks, a plastic carboy is the usual next size up.
Care and Handling
- Loosen the cap slightly while dispensing, or the flow slows as a partial vacuum forms above the liquid
- Check the tap for drips after filling, and do not overtighten a plastic stopcock
- Empty, rinse and air-dry the vessel regularly; standing water grows algae or biofilm, especially in light
- Label the contents and date, and keep strong oxidisers and solvents out unless the material is rated for them
Where the Deluxe Aspirator Bottle Earns Its Place
- Dispensing distilled water at the preparation bench for making up solutions and final rinses
- Holding a buffer or wash solution for repeated use through a practical session
- Storing saline or rinse water in microbiology and histology preparation rooms
- Acting as a gravity-fed reservoir connected by tubing to apparatus
- Demonstrating displacement, drawing air through apparatus as water runs out
Specifications
| Type | Bottle with bottom outlet (tubulation) for dispensing |
| Outlet control | Normally a stopcock or tap on the lower outlet |
| Typical contents | Distilled or deionised water, buffers, dilute reagents, media |
| Filling | Through the top neck, then closed with its cap or stopper |
Why Choose LabEquip
Lab technicians and practical in-charges who prepare solutions for whole classes are the usual buyers, since a tap-fed supply on the prep bench saves lifting heavy stock bottles. The deluxe bottle sits in the Biology Lab Products range at LabEquip; tell us the capacity you have in mind through the contact page.
Related Products
- Carboy, Plastic: A plastic carboy for bulk stock, used to refill the aspirator bottle.
- Wash Bottle: A wash bottle with delivery tube and jet, the usual vessel filled from an aspirator for rinsing.
- Aspirator Bottles, Screw Cap with Tubulation: An aspirator bottle with a screw cap and tubulation outlet that takes tubing or a stoppered tap.
- Aspirator Bottle: The general aspirator bottle page, covering gravity dispensing and respiration experiments.
Frequently Asked Questions
What is the deluxe aspirator bottle used for?
The Aspirator Bottle, Deluxe is a bench reservoir with an outlet near the base, normally fitted with a stopcock or tap. Labs keep distilled or deionised water, buffers, dilute reagents and prepared media in it and dispense straight from the tap into a beaker, cylinder or wash bottle, without lifting or pouring.
Why does the flow from an aspirator tap slow down or stop?
If the cap at the top is screwed down tight, a partial vacuum forms as liquid leaves and the flow slows to a stop, so loosen the cap slightly while dispensing. The flow also slows naturally as the bottle empties, because the height of liquid above the outlet, which pushes it out, becomes smaller.
How is an aspirator bottle different from a carboy?
A carboy is a larger container for bulk stock, such as water collected from a still. An aspirator bottle is a bench-sized reservoir with a bottom outlet for everyday dispensing. Many labs keep a carboy for bulk storage and refill the aspirator bottle from it as needed.
Where should an aspirator bottle be placed on the bench?
Stand it on a stable shelf or platform above the vessel being filled, since the flow depends on the height of liquid above the outlet. Keep it away from the bench edge, from direct sunlight, which encourages algae in water, and from heat sources. Leave room under the tap for the largest vessel you will fill.
How often should water in an aspirator bottle be changed?
Change it at a regular interval, such as weekly, and sooner if it looks cloudy. Empty the bottle, rinse it and refill it with fresh water rather than topping up, because topping up keeps old water and any growth at the bottom. Write the filling date on a label so everyone knows how fresh it is.
How do I fill a wash bottle from an aspirator bottle without contaminating it?
Hold the wash bottle under the outlet without letting the tip of the tap touch it, open the tap, fill and close the tap fully. Run off a little liquid first if the bottle has stood unused. Keeping the outlet clean and untouched protects the whole reservoir, since everything leaving it passes that point.
Last Updated: November 2026










Reviews
There are no reviews yet.