Quick Answer: The Profile Projector, Student, 300mm Diameter is a teaching optical comparator whose 300mm diameter screen displays the magnified shadow of a component for outline inspection and measurement. A 300mm profile projector gives a larger viewing area than a 200mm model, so more of the outline stays visible and small groups can watch together.
What the Larger Screen Changes
On any profile projector, the outline is enlarged by the lens and the screen sets how much of that enlarged outline is visible at once. A screen of 300mm diameter is half as wide again as a 200mm one, so a longer thread, a full gear segment or a whole small part can stay in view at a given magnification. It also makes it easier for two or three students to see the screen together while one operates the stage.
The measuring principle does not change. Light passes the component on the stage glass, the lens projects its shadow, and the edges on the screen are compared with a chart or with reference lines. The ‘Student’ label indicates a model intended for teaching labs; the magnification lenses, stage travel and type of readout are not stated in the listing, so compare those against your practical sheets.
The smaller 200mm student model suits benches with less space, and the portable Shop/Field Microscope covers quick checks on parts away from the lab.
Specifications
| Instrument | Profile projector, student model |
| Screen | 300mm diameter |
| Principle | Shadow of the part projected through a lens onto the screen |
| Measurement | Non-contact comparison and outline measurement |
| Viewing | Room for a small group to watch the screen |
| Lenses, stage travel and readout | Confirm at enquiry |
Care & Handling
- Clean the screen of the 300mm profile projector with a soft dry cloth; the translucent surface marks easily with solvent.
- Handle projection lenses by their barrels and store spare lenses capped.
- Remove parts from the stage glass after each exercise and wipe away metal swarf, which scratches glass.
- Cover the projector when not in use and switch the lamp off between groups.
Applications
- Metrology practicals on thread, gear and radius inspection
- Checking small turned components against overlay charts
- Demonstrating tolerance and outline inspection to a small group
- Inspecting flat pressed parts, springs and washers for shape errors
Why Choose LabEquip
Engineering colleges and technical training centres that want a larger screen for group demonstrations choose the 300mm model. It is listed in the LabEquip Microscope & Optics range.
Frequently Asked Questions
Why choose a 300mm screen over a 200mm screen?
A larger screen shows more of the magnified outline at once and is easier for a small group to watch. It needs more bench space and is usually a larger instrument overall.
How accurate are profile projector measurements?
Accuracy depends on the lens magnification, the stage readout and how well the edge is judged on the screen. Using the highest magnification that keeps the feature on screen, and checking against a known gauge, improves results.
What is an overlay chart?
It is a transparent chart printed with the ideal outline of a part at the projector’s magnification. Laid on the screen, it shows at a glance whether the projected profile matches the design.
Can the image appear reversed?
Depending on the optics, the projected image may be upright or inverted, which affects which way the part seems to move when the stage is turned. Students should practise stage movements before taking measurements.
What room lighting suits a profile projector?
A dim room with no bright light falling on the screen gives the clearest outlines. Position the projector away from windows, or shade the screen, if the lab cannot be darkened.
Which courses use a profile projector?
It is used in production engineering, mechanical engineering and quality control courses, and in toolroom training where students learn to inspect parts against drawings.
Last Updated: September 2026










Reviews
There are no reviews yet.