Search

In Stock

Masses set (Weights), Knobbed, Brass

Ametrological-Grade Passivated Brass: Each mass is precision-machined from high-density brass alloy and finished with a protective layer to resist oxidation, ensuring mass integrity remains within strict tolerance limits under varying laboratory humidity.

Ergonomic Knobbed Handling Architecture: Designed with specialized lifting knobs that facilitate secure displacement via forceps, minimizing the risk of skin-oil contamination and microscopic surface abrasion during critical analytical procedures.

₹1,230.00

Quick Answer: The Masses set (Weights), Knobbed, Brass is a set of cylindrical brass weights with lifting knobs, the classic laboratory pattern for weighing on beam, pan and physical balances. A knobbed brass masses set gives durable, non-magnetic known masses that keep their value with careful handling.

Weighing by Substitution: Borda’s Method

A beam balance whose two arms are not exactly equal gives a biased answer in ordinary weighing, because the same mass produces different moments on each side. Borda’s method of substitution removes that bias. The object is placed on one pan and balanced with a counterpoise of sand, lead shot or any convenient material on the other. The object is then removed and replaced by brass weights until the same balance is restored.

Since the weights now do exactly what the object did, on the same arm and against the same counterpoise, their total equals the object’s mass whatever the ratio of the arms. The method is slower than direct weighing, but it is a valuable lesson in how a well-designed procedure can cancel an instrument error instead of demanding a better instrument.

The Brass Knobbed Pattern

Knobbed brass weights are the long-established form for laboratory sets. The knob gives forceps a firm grip and keeps fingers away from the body of the weight, the flat base sits squarely on the pan, and the pieces stack neatly. Brass is dense, so each piece is compact; it does not rust; and it is not magnetic, an advantage near magnets in some balances and in physics practicals.

Applications

  • Comparison weighing on beam, pan and physical balances
  • Borda’s substitution method for balances with unequal arms
  • Consistency checks on school electronic balances
  • Known masses for density, specific heat and calorimetry practicals

Specifications

Set type Knobbed weights
Material Brass
Shape Cylindrical with lifting knob
Used with Beam, pan, physical and top-pan balances
Denominations, forceps and case Confirm at enquiry

Care & Handling

  • Lift the knobbed brass masses with forceps or gloves, gripping the knob.
  • Put each piece back in its own place in the case after use, so a missing piece is noticed.
  • Keep the set away from acid fumes and damp, which tarnish brass.
  • Never use a weight as a hammer, wedge or doorstop; dents and scratches change its mass.

Why Choose LabEquip

Physics and chemistry departments that want a lasting general-purpose set choose knobbed brass. LabEquip lists it in its Physics Equipments range, and the Roberval-type double pan balance is a matching balance for comparison weighing. Send the denominations you need through the contact page.

Frequently Asked Questions

What is Borda’s method of weighing?

It is weighing by substitution. Balance the object against a counterpoise, then replace the object with known weights until balance returns. The weights equal the object’s mass even if the balance arms are unequal.

Why is brass used for weights?

Brass is dense, so weights are compact; it resists corrosion; and it is not magnetic. Those properties help a weight keep its mass for years and avoid interference with magnetic parts or experiments.

What is the purpose of the knob?

It gives a secure grip for forceps or gloved fingers, so the body of the weight is not touched. It also makes stacking and lifting the smaller pieces easier.

How is Borda’s method different from double weighing?

Double weighing weighs the object in each pan in turn and combines the two results. Borda’s method keeps the object and the weights on the same pan against a fixed counterpoise, so the arm lengths never enter the calculation.

Does tarnish change the mass of brass weights?

Light tarnish is a very thin surface film with negligible mass. Heavy corrosion from fumes or damp is a different matter, so the set should be stored in a closed case in a clean, dry place.

Can these weights be used to check an electronic balance?

Yes, for routine consistency checks: place a weight in the centre of the pan and compare the reading with its marked value. Formal calibration uses weights of a stated accuracy class kept for that purpose.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)