Quick Answer: A flameproof and waterproof platform scale is a platform weighing scale whose electrical parts are enclosed so that an ignition inside cannot set off a surrounding flammable atmosphere, and sealed against water. The flameproof platform scale is intended for weighing drums, containers and batches in paint, solvent, chemical and pharmaceutical plants, subject to its approval for the specific hazardous area.
What Flameproof Means
In hazardous-area practice, flameproof describes an enclosure strong enough to contain an explosion of gas or vapour inside it, with joints shaped so that any escaping hot gases are cooled below the ignition temperature of the atmosphere outside. It does not mean the scale cannot burn or is fire resistant. Other protection methods, such as intrinsic safety, keep the electrical energy in a circuit too low to cause ignition, and weighing systems for hazardous areas often combine methods, for example intrinsically safe load cells with a flameproof indicator.
Hazardous areas are classified into zones according to how often a flammable atmosphere is present, and the equipment for them is marked with the gas groups and temperature class it suits. A scale may be used only where its marking and documents match the classification of the location.
Before It Is Installed
Because protection depends on the specific design, the buyer must check the hazardous-area marking and approval documents of the unit against the site’s area classification before installation, and the installation, cable entries and any barriers must follow those documents. LabEquip does not state an approval for this listing; request the model’s documents at enquiry and ask the plant’s electrical safety officer to examine them.
Specifications
| Type | Platform scale of flameproof and waterproof construction (as titled) |
| Intended areas | Locations where flammable gases or vapours may be present |
| Protection concept | Flameproof enclosure for electrical parts |
| Maintenance | By staff trained in hazardous-area equipment |
| Hazardous-area marking, water-protection rating, capacity and size | Confirm at enquiry |
Applications
- Weighing solvent and paint drums in filling and mixing areas
- Chemical and pharmaceutical plants handling flammable liquids
- Fuel, oil and gas facilities where flammable vapours may occur
- Wet, washdown areas within such plants
Care & Handling
- Never open the indicator or junction boxes in a hazardous area while they are powered.
- Keep flamepath joints clean and undamaged; do not paint over them or let them corrode.
- Have inspection and repair carried out only by people trained in hazardous-area equipment.
- Replace cable glands and seals only with parts specified for the approval.
Why Choose LabEquip
Paint, solvent, chemical and pharmaceutical plants buy flameproof scales when drums and batches must be weighed where flammable vapours can occur. LabEquip lists it in Physics Equipments alongside the IP67 waterproof platform scale for wet areas without flammable atmospheres; send your zone classification through our contact page.
Frequently Asked Questions
Does flameproof mean the scale cannot catch fire?
No. Flameproof means the enclosure can contain an internal ignition of gas or vapour and stop it spreading to the atmosphere outside. It is a protection method for electrical equipment, not a fire-resistance rating.
Can it be used in any hazardous area?
Only in the zones, gas groups and temperature class shown on its marking and documents. These must match the classification of the area where it will be installed.
What is the difference between flameproof and intrinsically safe?
A flameproof design contains any explosion inside a strong enclosure. An intrinsically safe design keeps the electrical energy too low to ignite the atmosphere at all. Weighing systems sometimes use both for different parts.
Who should approve the installation?
The plant’s electrical or process safety officer, using the area classification and the scale’s documentation. Installation and cable entries must follow the approved arrangement.
Why is it also waterproof?
Chemical and process plants are often washed down, and water entering the enclosure or the load cells causes faults. Sealing keeps water out, but the exact protection level should be checked for the model.
Can ordinary maintenance staff service it?
Inspection and repair of hazardous-area equipment should be done by people trained for it, because an incorrect repair can remove the explosion protection without any visible sign.
Last Updated: October 2026










Reviews
There are no reviews yet.