Quick Answer: This platform scale combines a mild steel platform and frame with parts moulded in ABS plastic, typically the indicator housing or a platform cover, for general weighing of cartons, sacks and goods in shops, stores and offices. Pairing ABS and mild steel balances strength with low weight at an economical level.
Two Materials, Two Jobs
Mild steel carries the load. It is stiff enough to keep the platform flat and to pass weight evenly to the load cell or cells, and it can be welded into a rigid frame. ABS (acrylonitrile butadiene styrene) is a tough, impact-resistant thermoplastic used for housings because it moulds into complex shapes, takes a good surface finish and does not rust.
Which parts are ABS on this model, whether the indicator housing, a top cover over the steel or both, is not stated in the title and should be confirmed at enquiry. ABS housings protect the electronics from knocks, but the plastic softens at fairly low temperatures and is attacked by some solvents, so keep it away from hot surfaces and strong chemicals.
Applications
- Parcel and courier counters
- Shop and godown weighing of sacks and cartons
- School, college and office stores
- Light-duty workshop weighing
Where It Works Well
A steel platform with a plastic indicator suits dry indoor weighing: parcel counters, small shops, institutional stores, offices and light warehousing. It is not intended for washdown or outdoor use, where moisture would reach the steel and the electronics. On the floor or bench, keep the indicator where trolleys and cartons will not knock it.
Specifications
| Type | Platform scale |
| Materials (as titled) | ABS plastic and mild steel |
| Mild steel role | Load-bearing platform and frame |
| ABS role | Moulded housing or cover |
| Suited to | Dry indoor use |
| Capacity, platform size and power source | Confirm at enquiry |
Care & Handling
- Clean the ABS housing with a damp cloth and mild soap; solvents such as acetone damage it.
- Keep the steel platform dry and repair chipped paint.
- Do not rest heavy or hot items on the indicator housing.
- Re-zero before each weighing and check with a known weight from time to time.
Why Choose LabEquip
Courier counters, shops and institutional stores buy this platform scale for dependable indoor weighing at a modest cost. LabEquip lists it in Physics Equipments beside the mild steel platform scale; contact us through the enquiry page with your typical loads.
Frequently Asked Questions
What is ABS plastic?
ABS (acrylonitrile butadiene styrene) is a tough, impact-resistant thermoplastic widely used for equipment housings. It moulds well, resists knocks and does not rust.
Which parts of this scale are ABS and which are mild steel?
The mild steel forms the load-bearing platform and frame. ABS is used for moulded parts such as the indicator housing or a platform cover; confirm the exact parts for this model when you enquire.
Can the scale be used outdoors?
It is meant for dry indoor use. Rain and humidity would rust the steel and could reach the electronics, so use a water-protected scale outdoors.
How should the ABS housing be cleaned?
Wipe it with a damp cloth and mild soap. Solvents such as acetone and paint thinners soften or crack ABS and should not be used.
Why is the platform made of steel rather than plastic?
The platform must stay flat and stiff under load so that weight reaches the load cells evenly. Steel provides that stiffness; a plastic platform alone would flex.
What loads suit this scale?
Cartons, sacks, parcels and goods within its rated capacity, placed centrally. Avoid dropping loads and never exceed the capacity shown on the scale.
Last Updated: October 2026










Reviews
There are no reviews yet.