Search

In Stock

Spring (Newton) Balance, Round Type with Tubular Nylon Body

High-Impact Polyamide Housing: The chassis is fabricated from industrial-grade, injection-molded nylon, providing superior mechanical damping and resistance to chemical corrosion compared to standard polystyrene variants.

Precision-Threaded Zero-Tare Mechanism: Equipped with a calibrated top-adjustment nut that allows for manual taring of the internal spring, ensuring metrological consistency and repeatable data acquisition even after high-frequency tensile cycles.

₹335.00

Quick Answer: The Spring (Newton) Balance, Round Type with Tubular Nylon Body is a lightweight force meter: a coiled spring inside a round nylon tube extends under load and moves an indicator over the scale. The nylon spring balance is used for measuring forces in pulley, lever and work-done practicals in school physics.

Nylon Body: Light and Forgiving

Nylon is a tough engineering plastic. It is light, it does not rust and it tends to flex rather than crack when knocked, which is why it makes a practical body for this round-type balance. In a busy classroom where balances are passed between groups, hung on stands and now and then dropped, those properties count for more than appearance.

The body is not transparent, so students read the scale rather than watching the spring. For measuring the forces in machines and calculating work, that is all that is needed.

Typical Uses

  • Measuring effort and load in pulley systems to find mechanical advantage and efficiency
  • Lever and moments experiments, pulling at measured distances from the pivot
  • Work done calculations: force multiplied by the distance moved in the direction of the force
  • Everyday force measurements by student groups, such as the pull needed to open a drawer

Forces in Pulleys and Levers

Simple machines are where the nylon spring balance earns its place. Lift a load directly with the balance and note the force; then raise the same load through a single movable pulley or a block-and-tackle system and read the effort again. The ratio of load to effort is the mechanical advantage. Measuring how far the effort moves compared with the load, students find that the work put in is always a little more than the work got out; the difference, lost mainly to friction and to lifting the pulley block, sets the efficiency.

The same balance can pull down on a pivoted rule at a measured distance from the pivot, so that the turning effect it produces can be compared with that of a hanging load in moment of force experiments.

Specifications

Type Round tubular spring (newton) balance
Body Tubular nylon, lightweight
Reads Force in newtons on the sliding scale
Suited to Group practicals with pulleys, levers and work done
Range and graduations Confirm at enquiry

Care & Handling

  • Keep the nylon spring balance away from radiators, burners and hot plates; plastics soften and distort with heat.
  • When reading an effort, pull slowly and steadily; a jerky pull makes the indicator overshoot.
  • Do not pull past the end of the scale, as an overstretched spring no longer returns to zero.
  • Wipe the body with a damp cloth and mild detergent, and let it dry before storage.

Why Choose LabEquip

Nylon-bodied balances suit schools that need many force meters for group practicals, since they are light to handle and cope with knocks. LabEquip includes this one in its physics equipment category. Share your required ranges and quantities on the contact page.

Frequently Asked Questions

How is mechanical advantage measured with a spring balance?

Weigh the load directly with the balance, then measure the effort needed to raise it slowly through the machine. Mechanical advantage is the load divided by the effort; for a single movable pulley it comes out a little under two because of friction and the weight of the pulley.

Why is the efficiency of a pulley system always below 100 percent?

Some of the work done by the effort goes into overcoming friction at the pulley axles and into lifting the movable pulley block itself. Only the rest is useful work done on the load, so the output is always smaller than the input.

How is work done calculated from the balance reading?

Multiply the force shown on the balance, in newtons, by the distance moved in the direction of that force, in metres. The answer is in joules. Pull steadily so that the reading stays constant over the distance measured.

Is nylon strong enough for school use?

Yes, for normal practical work. Nylon is a tough plastic that resists cracking and does not rust. Its main weakness is heat, so keep the balance away from burners and hot plates.

Can I read the balance while pulling downward over a pulley?

Yes. A spring balance measures force along its own axis in any direction. When pulling downward the balance is upside down, so check its zero in that position first, because the weight of its moving parts now acts the other way.

Does the weight of the pulley affect the reading?

Yes, for a movable pulley. The effort has to lift the pulley block as well as the load, so weigh the block with the balance and include it when comparing the ideal and actual mechanical advantage.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)