Quick Answer: A filter tube for Gooch crucible is a funnel-shaped holder that carries a Gooch or sintered crucible over a filtering flask during suction filtration. The crucible sits in the wide top on a rubber collar that seals around it, and the narrow stem passes through a bung into the flask neck.
Why the Crucible Needs a Holder
A filter crucible has no stem of its own, so it cannot be pushed into a flask neck the way a funnel can. The filter tube provides the missing connection. Its upper end is wide enough to take the crucible, and a ring of soft rubber, often called a Gooch rubber or crucible adapter, grips the crucible wall and seals it against the tube. When suction is applied through the flask’s side arm, air and liquid can only enter through the crucible’s filter base.
This arrangement lets the analyst weigh the crucible alone, filter into it, then lift it out cleanly for drying and reweighing without touching the precipitate. The stem also directs the filtrate down into the flask, away from the side arm, which keeps liquid from being drawn towards the vacuum line.
The filter tube is the usual partner of the low form Gooch crucible with sintered disc and of the filtration Gooch crucible listed in the lab glassware range.
Care & Handling
- Moisten the rubber collar with water before seating the crucible, so it grips evenly without twisting.
- Release suction before lifting the crucible out, otherwise the collar can pull away and splash filtrate.
- Replace collars that have hardened or cracked, since a leaking seal draws air around the crucible instead of through it.
- Rinse the tube and stem after each analysis so dried salts do not contaminate the next filtrate.
Applications
- Gravimetric determinations of chloride as silver chloride or of nickel as its dimethylglyoxime complex
- Filtering onto glass fibre discs placed in Gooch crucibles when determining suspended solids in water
- Holding crucibles while insoluble residues in reagents and materials are collected
- Analytical chemistry teaching labs where each bench has its own crucible filtration set
Specifications
| Item | Filter tube (holder) for Gooch and sintered filter crucibles |
| Seal | Rubber collar between crucible wall and tube |
| Connection to flask | Stem through a bored bung in the filtering flask neck |
| Use | Suction filtration in gravimetric analysis |
Why Choose LabEquip
Analytical laboratories and colleges running gravimetric practicals need one filter tube for each crucible set in use. LabEquip includes filter tubes in its chemistry lab equipment; give your crucible size on the contact page.
Related Products
- Crucible, Porcelain, Gooch: A glazed porcelain Gooch crucible with perforated base that the filter tube holds over the flask.
- Gooch Crucible, Low form, With Sintered Disc: A low-form Gooch crucible with a sintered disc base for suction filtration and drying to constant mass.
- Crucible Sleeve, Set: A set of rubber crucible sleeves in graded sizes for sealing different crucibles in the tube.
- Flask, Filtering: A heavy-walled side-arm filtering flask that the filter tube’s stem passes into.
Frequently Asked Questions
What is a Gooch rubber on a filter tube for Gooch crucible?
It is the soft rubber collar that sits in the wide top of the filter tube and grips the wall of the crucible. When suction is applied, it seals the crucible to the tube, so air and liquid can only pass through the crucible’s filter base.
Does the filter tube work with sintered crucibles as well as porcelain Gooch crucibles?
Yes. The filter tube holds porcelain Gooch crucibles with a filter mat and sintered glass crucibles alike, as long as the rubber collar fits the crucible wall snugly.
Why is the suction weak when using a Gooch filter tube?
Weak suction usually means a leak: a collar that does not fit the crucible, a bung loose in the flask neck, cracked tubing or a water pump with low water flow. Check each seal in turn, starting with the collar.
Should the filtrate be kept after a gravimetric filtration?
Keep it until the result is complete. Adding a drop of the precipitating reagent to the clear filtrate shows whether precipitation was complete; any new cloudiness means more precipitate must be collected.
How is the crucible removed without disturbing the precipitate?
Release the vacuum first by opening the side line or disconnecting the tubing, then lift the crucible straight out of the collar. Removing it under suction can tear the filter mat or pull precipitate through.
Why does the stem of the filter tube reach below the side arm?
The long stem carries the filtrate down into the body of the flask, below the side arm, so liquid is not drawn towards the vacuum line. That protects the pump and keeps the whole filtrate in the flask.
Last Updated: November 2026










Reviews
There are no reviews yet.