Quick Answer: A sintered glass Buchner funnel is a glass filter funnel with a porous disc of fused glass particles sealed in place of the usual perforated plate and filter paper. It is used for suction filtration of precipitates, crystals and liquids that would attack paper, seated on a filtering flask connected to a vacuum source.
A Filter Built into the Funnel
In a conventional Buchner funnel the solid is caught on a circle of filter paper laid over a perforated plate. Here the filtering layer is part of the funnel itself: a disc made by heating graded glass grains until they fuse at their points of contact, leaving a network of fine channels. Liquid drawn through by suction passes along those channels, while particles larger than the pores stay on top as a cake that can be washed and sucked dry on the disc.
Doing without paper matters in several situations. Strong acids, oxidising solutions such as potassium permanganate and hot concentrated reagents can weaken or char cellulose, while glass is unaffected by most of them. No paper fibres enter the filtrate or the product, and the same funnel can be cleaned and reused many times.
Seat the funnel in a filtering flask using a bored bung or conical rubber adapter, then connect the side arm to a water filter pump or vacuum line. The porcelain Buchner funnel with sintered disc is the opaque ceramic alternative; glass has the advantage that the disc can be inspected for clogging or for colour left by earlier samples.
Specifications
| Item | Buchner-type filter funnel with a fused sintered glass disc |
| Filter medium | Porous glass frit; no filter paper needed |
| Use with | Filtering flask, rubber bung or adapter, vacuum source |
| Chemical limits (general) | Attacked by hydrofluoric acid, hot concentrated phosphoric acid and hot strong alkalis |
Applications
- Collecting recrystallised organic products, such as aspirin or acetanilide, and washing them with cold solvent on the disc
- Filtering solutions of potassium permanganate, chromic acid or other oxidising reagents that damage filter paper
- Removing fine solids from reagents or solvents before use, without adding paper fibres
- Isolating precipitates in teaching labs where the funnel is reused by successive groups
Care & Handling
- Wet the disc with the solvent before pouring in the mixture, and apply suction gently at first so fine particles do not pack deep into the pores.
- Clean straight after use by drawing through a solvent that dissolves the residue, then plenty of water; flushing from below clears pores better than rinsing from above.
- Dry in an oven with gradual heating and cooling, never by putting a wet frit into a hot oven or over a flame, as uneven heating can crack the seal between disc and wall.
- Do not scrape the disc with a metal spatula; lift the cake with a plastic or rubber-tipped tool.
Why Choose LabEquip
University organic labs, pharmacy colleges and quality control rooms that filter corrosive or oxidising mixtures tend to prefer a sintered glass Buchner funnel to paper. LabEquip supplies it within the chemistry lab equipment range; state the disc porosity and funnel size you need on the contact page.
Related Products
- Buchner Funnels, Porcelain, With Sintered Disc: A porcelain Buchner funnel with a sintered ceramic disc, an alternative frit material.
- Gooch Crucible, Low form, With Sintered Disc: A low form Gooch crucible with a sintered disc for gravimetric filtration and drying.
- Buchner Funnel, Plastic: A plastic Buchner funnel that uses filter paper on a perforated plate.
- Filtering Kit: A filtering kit with a filter flask and hand pump with gauge for suction filtration.
Frequently Asked Questions
What is a sintered glass Buchner funnel?
It is a glass filter funnel in which a porous disc of fused glass grains replaces the perforated plate and filter paper. The disc itself catches the solid, and liquid is drawn through by suction from a filter flask below.
Why use a sintered glass funnel instead of filter paper?
The glass frit resists liquids that attack paper, such as strong acids and oxidising solutions, and adds no paper fibres to the product. It can also be dried and weighed with the solid, which is useful in gravimetric work.
What do porosity grades on sintered glass mean?
Sintered discs are made in grades from coarse to very fine pore sizes. Coarse discs filter quickly and suit large crystals, while fine discs hold back fine precipitates but filter more slowly. The grade should match the particle size of the solid.
Which chemicals damage a sintered glass disc?
Hydrofluoric acid, hot concentrated phosphoric acid and hot strong alkalis attack glass and enlarge or destroy the pores, as noted in the specifications. Avoid these and filter them through suitable plastic or other media.
How do you clean a sintered glass funnel after use?
Rinse it straight away by drawing water, then a suitable solvent, through the disc in both directions where possible. Choose a cleaning liquid that dissolves the residue, such as dilute acid for carbonates, and avoid scraping, which can clog the surface.
Can a sintered glass funnel be heated or oven-dried?
Yes, glass funnels are usually dried in an oven, but heat and cool them gradually. A sudden change in temperature can crack the disc where it is sealed into the funnel wall.
Last Updated: November 2026









Reviews
There are no reviews yet.