Quick Answer: A plain fractionating column is a straight glass tube placed between the boiling flask and the still head in fractional distillation. It has no internal indentations, so it is normally filled with a packing such as glass beads, helices or rings that gives vapour and liquid a large contact area.
Why the Column Is Plain
Fractional distillation works because vapour rising through a column meets liquid running back down, and at each contact the vapour becomes richer in the more volatile component. An empty straight tube offers only its inner wall for that exchange, so on its own it separates little better than simple distillation. The plain column is made to be packed: the packing supplies the surface, and the choice of packing sets the efficiency.
Glass beads are easy to obtain and to clean, Raschig rings pack loosely and let vapour through freely, and small glass or stainless steel helices give a large surface for close-boiling mixtures. Some plain columns have a constriction or indentations near the bottom to hold the packing; where they do not, a small plug of glass wool or a support is used.
Its flexibility is the main difference from the Vigreux fractionating column, whose built-in indentations need no packing but give fewer theoretical plates for a given length.
Applications
- Separating methanol or ethanol from water in teaching demonstrations
- Fractional distillation of solvent or hydrocarbon mixtures with close boiling points
- Comparing packings in student investigations of column efficiency
- Purifying reaction solvents before use in synthesis
Specifications
| Form | Straight glass tube without indentations |
| Used with | Packing such as glass beads, helices or rings |
| Position | Between the boiling flask and the still head |
Care & Handling
- Insulate the column with glass wool or foil so the room does not cool the vapour too much; otherwise the column floods with returning liquid.
- Heat slowly and steadily, because a fast boil pushes vapour through without equilibrium and floods the packing.
- Empty and wash the packing separately, and dry it before refilling so no water is carried into the next distillation.
Why Choose LabEquip
Colleges and industrial training labs that run fractional distillation practicals often choose a plain column so they can compare packings. LabEquip lists it with its chemistry lab equipments; state the length and joint sizes on the contact page.
Related Products
- Fractionating Column, Vigreux: A Vigreux column with built-in indentations, for runs where packing is not wanted and low hold-up matters.
- Fractionating Column, Rod and Disk Pattern: A rod and disk column whose fixed internal disks replace loose packing as the contact surface.
- Distillation Apparatus: A distillation apparatus providing the flask, condenser and receiver that the column fits between.
- Receiver Adapter, Plain Bend: A plain bend receiver adapter that carries the separated fractions from the condenser into an open flask.
Frequently Asked Questions
Why is a plain fractionating column filled with packing?
An empty straight tube offers only its inner wall for rising vapour and returning liquid to meet, so it separates little better than simple distillation. Packing such as glass beads, rings or helices gives a large surface on which vapour repeatedly condenses and re-evaporates, becoming richer in the lower-boiling liquid as it climbs.
What packing should be used in a plain fractionating column?
Glass beads are easy to obtain and clean, Raschig rings pack loosely and let vapour through freely, and small glass or metal helices give a large surface for close-boiling mixtures. Choose packing that resists the liquids being distilled, and pack it evenly so vapour cannot channel up one side of the column.
How is packing held in a plain column without indentations?
If the column has no constriction or indentations near its base, a small loose plug of glass wool or a coil of wire at the bottom stops the packing falling into the flask. Keep the plug loose: a tight plug restricts the vapour and makes the column flood.
What is a theoretical plate in fractional distillation?
A theoretical plate is one ideal stage of evaporation and condensation, the separation you would get from one perfect simple distillation. A column rated at several theoretical plates separates like several distillations in a row. Longer columns and finer packing give more plates but hold up more liquid.
What does flooding mean in a packed fractionating column?
Flooding happens when vapour rises so fast that returning liquid cannot run back down and builds up in the packing. The column fills with liquid, separation collapses and liquid may be pushed into the still head. Reduce the heat until the liquid drains back and the column runs evenly again.
Can a fractionating column separate ethanol completely from water?
No. Ethanol and water form an azeotrope, a mixture that boils at a fixed composition of about 95 percent ethanol, so distillation alone cannot go beyond that point however efficient the column. A plain packed column will still concentrate a dilute ethanol solution a long way towards that limit.
Last Updated: November 2026










Reviews
There are no reviews yet.