Search

In Stock

Receiver Adapter, Plain Bend

Standardized 1:10 Taper Joints: Features CNC-ground male and female interchangeable joints that ensure a hermetic, vacuum-tight seal across diverse modular glass assemblies without the need for excessive lubricants.

Fire-Polished Drip Tip: Incorporates a precision-tapered delivery end designed to minimize liquid holdup and prevent distillate backflow through controlled, consistent droplet detachment.

₹490.00

Quick Answer: A plain bend receiver adapter is the simplest glass receiver fitting: a curved tube with a joint for the condenser outlet at one end and a delivery end at the other, with no side tube or vent. It turns the distillate from a sloping condenser downwards into a flask or cylinder.

A Simple Shape With One Rule

Having no side opening, the plain bend is chosen when the receiving vessel itself is open: a conical flask, a beaker or a measuring cylinder standing under the delivery end with room for air to escape around it. The apparatus then vents naturally at the receiver, and the plain shape has nothing to block, leak or snap off. That simplicity is why it is the usual bend in school distillation sets and in kits for distilling water, ethanol-water mixtures or a recovered solvent.

The one rule concerns sealing. If the delivery end is a cone pushed firmly into a jointed receiver, the whole train is closed, and heating a closed apparatus is dangerous. For a sealed receiver choose a vented or vacuum-connection bend instead.

Longer and shorter delivery patterns are listed separately.

Applications

  • Simple distillation of water, salt solutions or ethanol-water mixtures in school practicals
  • Collecting distillate in a conical flask or measuring cylinder to record its volume
  • Replacing a broken bend in an existing ground-joint distillation kit
  • Recovering a used solvent at atmospheric pressure into an open receiver

Care & Handling

  • Keep the delivery tip inside the mouth of the receiver but clear of the collected liquid, so drops fall cleanly and nothing is drawn back.
  • Support the condenser with its own clamp so the bend never carries the condenser’s weight.
  • Rinse with distilled water after aqueous distillations, or with a little acetone after organic ones, then dry upright.

Specifications

Type Receiver adapter, plain bend
Side tube or vent None
Condenser end Ground joint to fit the condenser outlet
Intended use Delivery into an open receiver

Why Choose LabEquip

Science departments equipping several benches for distillation practicals generally order plain bends in multiples with their condensers. LabEquip carries them in its chemistry lab equipment range, and a long-stem version is listed for receivers that need deeper delivery; send quantities and joint sizes via the contact page.

Related Products

Frequently Asked Questions

What is a plain bend receiver adapter?

It is the simplest receiver fitting: a curved glass tube with a joint for the condenser outlet at one end and a delivery end at the other, with no side tube or vent. It turns the distillate from a sloping condenser down into a flask, beaker or measuring cylinder.

Can a plain bend be sealed into a receiver with a ground-glass neck?

Not for heating at normal pressure. With no side tube, pushing the delivery end firmly into a jointed receiver closes the whole set, and heating a closed apparatus is dangerous. Use a plain bend only with an open receiver, or choose a vented or vacuum bend for a sealed one.

Is a plain bend suitable for a school distillation practical?

Yes, it is the usual bend in school distillation sets and kits for distilling water, ethanol and water mixtures or a recovered solvent. With nothing to block, leak or snap off, it is easy to set up and clean, and the open receiver lets the apparatus vent naturally.

How far should the tip of a plain bend go into the receiver?

Let the tip enter just inside the neck of the receiving flask, without touching the liquid collected. That keeps drops inside the flask while leaving a gap around the tip for air to escape as distillate arrives.

Can a plain bend be used when distilling flammable solvents?

Yes, with care. Because the set vents at the open receiver, solvent vapour escapes there, so heat with a mantle or water bath rather than a flame, stand the receiver in an ice bath to reduce vapour, and keep ignition sources well away.

How do I tell a plain bend from a vented receiver adapter?

Look for a side tube or opening near the delivery end. A plain bend has none: just the condenser joint and the delivery end. Any extra outlet means it is a vented or vacuum pattern.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)