Quick Answer: A short stem funnel is a plain 60 degree filter funnel with a shortened outlet. It is chosen for hot filtration, where a long stem would cool the solution and let crystals block it, and for filling containers where a low, stable set-up is useful.
Hot Filtration Without a Blocked Stem
Recrystallisation often needs a hot solution filtered to remove insoluble impurities before it cools. If that solution runs down a long, cool stem, it loses heat quickly and the dissolved product begins to crystallise inside, blocking the outlet and wasting product. A short outlet gives the liquid only a brief distance to travel, so it reaches the receiving flask while still hot enough to stay in solution.
Hot filtration works well when the funnel is warmed first, for example by standing it on the receiving flask while a little solvent boils beneath it, and when a fluted filter paper is used to speed the flow. Some laboratories use stemless funnels for the same reason; a short stem is a compromise that still guides the liquid neatly into the flask neck.
A shorter stem also sits lower in a filter stand or ring, which suits bench space under shelves and small receiving vessels. For cool solutions, where speed matters, the long stem version filters faster, and the plain 60 degree clear glass funnel covers general class filtration.
Care & Handling
- Preheat the funnel with hot solvent before a hot filtration; a cold funnel cools the solution and can crack if the glass is not heat resistant.
- Use tongs or a heat-resistant glove to move a funnel that has held hot liquid.
- Keep a little extra hot solvent ready to rinse any crystals from the paper into the flask.
- Wash the cone promptly so dried crystals do not cake on the glass.
Specifications
| Cone angle | 60 degrees, plain wall |
| Stem | Short, to reduce cooling and crystal formation |
| Suited to | Hot filtration in recrystallisation; filling containers |
| Paper | Quarter-folded or fluted filter paper |
Applications
- Removing charcoal or insoluble impurities from a hot solution before it is left to crystallise
- Filtering excess copper(II) oxide from hot copper(II) sulfate solution before growing crystals in class
- Filling reagent bottles and flasks where a long stem would be unstable
- Filtration in cramped set-ups, such as under a shelf or in a small fume cupboard
Why Choose LabEquip
Colleges running recrystallisation and schools making crystals of salts are the main buyers of short stemmed funnels. LabEquip carries this item within its chemistry lab equipment; send your sizes and quantities through the contact page.
Related Products
- Funnel, Plain 60 Degrees, Long Stem: The long stem version of this cone, better for cool solutions and for reaching into narrow necks.
- Powder Funnel, Plastic: A wide-stemmed plastic powder funnel for transferring solids, a job a narrow filter-funnel outlet cannot do.
- Flask, Conical (Erlenmeyer): An Erlenmeyer flask, the usual receiver in hot filtration because its neck holds the funnel and traps vapour.
- Funnel Holder, Plastic: A funnel holder to clamp the short stem funnel at a fixed height above the receiving flask.
Frequently Asked Questions
Why is a short stem funnel used for hot filtration?
A hot, nearly saturated solution cools quickly as it runs down a long glass stem, and crystals form inside and block it. A short stem gives the liquid only a brief path, so it reaches the receiving flask while still hot enough to stay in solution, and less product is lost in the funnel.
What is fluted filter paper and why use it in a short stem funnel?
Fluted paper is folded back and forth like a fan, so it touches the funnel only along its edges. Liquid passes through the whole paper surface instead of one side, and filtration is much faster. Speed matters in hot filtration, because the quicker the solution passes through, the less it cools.
How do I keep a short stem funnel hot during filtration?
Stand the funnel in the neck of the receiving conical flask and boil a little solvent in that flask, so hot vapour warms the funnel and paper before you pour. Pour the hot solution in portions and keep the remainder hot on the heat source between pours.
Can a short stem funnel be used for ordinary filtration?
Yes, it filters cool mixtures perfectly well. It is just a little slower than a long stem funnel, because the shorter liquid column gives less pull on the liquid in the paper. Its low height is also handy when the receiver is short or the set-up has to fit under a shelf.
Is a short stem funnel the same as a powder funnel?
No. A short stem filter funnel keeps the 60 degree cone and a narrow outlet for liquids and filter paper. A powder funnel has a short, wide stem so solids such as crystals and granules can pass without clogging. Use the powder funnel for transferring solids into narrow-necked flasks.
What should I do if crystals still block a short stem funnel?
Pour a little hot, pure solvent through the funnel to redissolve the crystals and wash them into the flask. Then heat the filtrate to evaporate the extra solvent before cooling. Warming the funnel more thoroughly, or using a slightly more dilute solution, helps prevent it happening again.
Last Updated: November 2026










Reviews
There are no reviews yet.