Search

In Stock

Cylinder, Nessler

Optically Clear Plane-Parallel Base: Features a precision-ground, fire-polished flat bottom that eliminates optical distortion, ensuring a uniform light path length and maximum transmittance for accurate visual colorimetry and spectrophotometric consistency.

Matched Volumetric Tolerances: Fabricated with uniform internal diameters and permanent, fire-fused graduation marks at standardized heights to ensure exact volume alignment across multiple units for side-by-side comparative analysis.

₹230.00

Quick Answer: A Nessler cylinder is a tall, flat-bottomed glass tube with an etched mark, used in pairs or sets to compare the colour or cloudiness of solutions by looking down through the liquid. It is the vessel for the Nessler ammonia test in water and for pharmacopoeial limit tests.

Comparing Colour Down a Long Column

Faint colours are hard to judge across the width of a test tube but much easier looking down a long column of liquid. The Nessler cylinder is built for that view: a tall, narrow tube with a flat, clear base, filled to a mark so that every solution in a comparison has the same depth. Two cylinders stand side by side on a white surface, one holding the sample and one a standard, and the analyst looks straight down through both.

The name comes from Nessler’s reagent, an alkaline solution of potassium tetraiodomercurate(II) that turns yellow to brown with ammonia, the classic test for ammonia in water samples. The same cylinders are used for pharmacopoeial limit tests, in which the faint opalescence produced by chloride or sulfate in a sample is compared with a standard, and for colour tests such as the limit test for iron.

Matched cylinders are important. If the glass tint, wall thickness or height to the mark differ between tubes, the comparison is biased.

Applications

  • Estimating ammonia in water samples with Nessler’s reagent
  • Chloride and sulfate limit tests in pharmaceutical analysis practicals
  • The limit test for iron, compared against a standard solution
  • Teaching visual colorimetry before students move on to a colorimeter

Care & Handling

  • Keep matched sets together and do not mix cylinders from different sets in one comparison.
  • View sample and standard under the same light against the same white tile, then swap their positions to check the judgement.
  • Nessler’s reagent contains mercury: wear gloves and eye protection, and collect waste for proper disposal instead of pouring it down the sink.
  • Keep the bases free of scratches and deposits, which scatter light and make turbidity comparisons unreliable.

Specifications

Item Tall, flat-bottomed colour-comparison tube
Viewing Vertically, through the full depth of liquid, over a white base
Mark Etched mark for filling to a fixed depth
Use Visual colorimetry and turbidity comparison against standards

Why Choose LabEquip

Water-testing laboratories, pharmacy colleges running limit tests and chemistry departments teaching colorimetry buy these comparison tubes in sets, often with a bulb type pipette for measuring the sample. LabEquip lists them in the chemistry lab equipment range; to order matched sets, use the LabEquip contact page.

Related Products

Frequently Asked Questions

What is a Nessler cylinder used for?

A Nessler cylinder is a tall, flat-bottomed glass tube with an etched mark, used in matched sets to compare the colour or cloudiness of solutions by eye. A sample and a series of standards are made up to the same mark and viewed side by side, as in the Nessler test for ammonia in water and in pharmacopoeial limit tests.

Why is a Nessler cylinder viewed from the top instead of the side?

Looking down through the full depth of liquid makes a faint colour much stronger, because the light passes through far more solution than it does across the width of the tube. Standing the cylinders on a white surface or over a light box and looking vertically down through each column makes small differences between sample and standard easier to see.

How do you carry out a colour comparison with Nessler cylinders?

Prepare standards of known concentration and the sample in identical cylinders, add the same reagents in the same order, make each up to the etched mark and mix. After the stated time, look down through the columns and find the standard that matches the sample. The sample concentration lies at that standard, or between two neighbouring ones.

Why do Nessler cylinders need to be matched?

A fair comparison needs every cylinder to have the same internal diameter, glass tint and height to the mark, so equal concentrations look equal. A cylinder with a slightly wider bore or a greener base would make its contents look different even at the same concentration, so cylinders are used and replaced as matched sets.

How are Nessler cylinders used in a pharmacopoeial limit test?

In a limit test for an impurity such as chloride or sulfate, the sample solution and a standard containing the permitted amount are treated with the same reagent in two cylinders. If the opalescence or colour in the sample cylinder is not more intense than in the standard, the sample passes. It is a pass-or-fail comparison, not a full measurement.

How should Nessler cylinders be cleaned and stored?

Rinse them straight after use, wash with a soft brush and laboratory detergent, rinse with tap water and then distilled water, and drain them upside down. Any film or scratch on the flat base affects the view, so avoid abrasive cleaners. Store them upright in their stand so the bases are protected and the matched set stays together.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)