Search

In Stock

Fixed Single Pulley Made of Aluminum with Bench Hook

Lightweight aluminum pulley wheel with low-friction rotation for smooth load movement

Integrated bench hook mounting system ensuring secure attachment during experiments

₹1,720.00

Quick Answer: The Fixed Single Pulley Made of Aluminum with Bench Hook is a single grooved aluminium pulley wheel in a frame that hooks or clamps over the edge of a laboratory bench. A fixed single pulley changes the direction of a force, so a hanging mass can pull a trolley or block horizontally along the bench in mechanics practicals.

What a Fixed Pulley Does

A fixed pulley does not move with the load; it only turns. Ideally it gives no mechanical advantage: the tension is the same on both sides of the wheel, so the effort equals the load. What it does provide is a change of direction. Fixed at the edge of the bench, it turns the downward pull of a hanging mass into a horizontal pull on an object resting on the bench top, which is the arrangement used in many mechanics experiments.

The bench hook lets the pulley be fixed quickly at any point along the bench edge and removed afterwards. Aluminium keeps the wheel light, and a light wheel matters: some of the hanging mass’s energy goes into spinning the pulley, and the smaller the wheel’s moment of inertia, the less it affects acceleration measurements. The wheel diameter, bearing type and the clamping range of the hook should be confirmed when ordering.

Setting Up for Reliable Results

The string from the trolley or block must leave the pulley parallel to the bench top. If it angles upwards or downwards, part of the tension pulls vertically, changing the normal reaction and therefore the friction. The pulley should be aligned so the string runs straight down the middle of its groove, and the hanging mass should have enough room to fall before the trolley reaches the pulley. A soft landing pad or box under the falling mass protects the floor and the masses.

Mechanics Experiments

  • Verifying Newton’s second law with a dynamic trolley on a track pulled by a falling mass
  • Finding the coefficient of limiting friction between a block and the bench
  • Measuring acceleration due to a known force with light gates or ticker tape
  • Comparing fixed and movable pulleys when introducing simple machines

Care & Handling

  • Tighten the bench hook or clamp firmly and check that the fixed single pulley does not move when the string is loaded.
  • Keep the axle clean and lightly lubricated if the design allows, so friction stays low and consistent.
  • Use strong, thin string that sits in the groove without slipping off the wheel.
  • Protect the bench edge with a piece of card under the clamp if the surface marks easily.

Specifications

Type Single fixed pulley with bench hook or clamp
Wheel material Aluminium (as titled)
Function Changes the direction of a force; ideal mechanical advantage of 1
Used with Trolley or wooden block, string, scale pan, slotted masses
Wheel diameter, bearing and clamp range Confirm at enquiry

Why Choose LabEquip

Physics departments buy several bench pulleys so that each group can run dynamics and friction experiments at the same time. LabEquip lists this pulley with its mechanics lab equipment in Physics Equipments; slotted weights provide the falling load. Ask about wheel size and clamp range through our contact page.

Frequently Asked Questions

What is the point of a pulley that gives no mechanical advantage?

It changes the direction of the force. At the bench edge it turns the downward pull of a hanging mass into a horizontal pull, so a falling weight can drive a trolley or block along the bench.

How is the pulley used to find the coefficient of friction?

Attach a block to a scale pan over the pulley and add masses until the block just starts to slide. The coefficient of limiting friction equals the total hanging weight, pan included, at that moment divided by the weight of the block.

How does the pulley help verify Newton’s second law?

A falling mass pulls a trolley with a known force through the pulley. Measuring the acceleration for several forces, while keeping the total mass constant, shows that acceleration is proportional to force.

Why is a light aluminium pulley preferred?

Some of the falling mass’s energy goes into spinning the wheel. A light wheel has a small moment of inertia, so it takes very little of that energy and has less effect on the measured acceleration.

Why must the string be parallel to the bench?

If the string slopes, part of the tension acts vertically. That changes the normal reaction on the block or trolley, and with it the friction, so the force along the bench is no longer what was intended.

How is the pulley fixed to the bench?

The bench hook or clamp fits over the edge of the bench top and is tightened until it holds firmly. It can then be moved along the bench to suit the length of the track or the position of the trolley.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)