Quick Answer: The Air Track and Air Pump System is linear motion apparatus in which air from a pump or blower escapes through rows of small holes along a hollow track, lifting gliders onto a thin cushion of air. With friction almost removed, the air track lets students study Newton’s laws, collisions, momentum and energy directly.
How the Air Cushion Works
The track is a hollow beam, usually with a triangular or square profile, closed at the ends and drilled along its upper faces with a regular pattern of fine holes. The pump forces air into the beam, and the air leaving the holes supports each glider on a film only a fraction of a millimetre thick. Because the glider never touches the track, sliding friction disappears; the small drag that remains comes from the air itself.
That is why the apparatus is so useful for mechanics teaching. On an ordinary bench a trolley slows down and stops, which suggests, wrongly, that motion needs a force to keep it going. On a level track a glider given a gentle push travels the whole length at almost constant speed, which is Newton’s first law seen directly.
Setting Up and Measuring
Level the track first, usually with its adjusting feet: with the pump running, a glider placed anywhere should stay still or drift only slowly. Motion can then be timed with photogates and a timer, with a stopwatch over marked distances, or by video. Tilting the track with a block under one foot gives a uniform acceleration of g sin θ, a clean way to measure g, while masses, buffers and coupling pieces turn gliders into colliding bodies for momentum experiments. Which gliders and accessories come with the system should be confirmed when ordering.
Experiments on the Track
- Newton’s first law: constant velocity on a level track
- Newton’s second law: acceleration of a glider pulled by a falling mass
- Conservation of momentum in elastic and sticking collisions
- Measuring g from the acceleration of a glider on a tilted track
- Simple harmonic motion of a glider held between two springs
Specifications
| System | Linear track with air pump or blower |
| Principle | Air cushion lifts gliders, removing sliding friction |
| Levelling | Adjustable feet (usual design) |
| Timing | Photogates, stopwatch or video (timing equipment is a separate item unless supplied) |
| Track length, gliders and accessories included | Confirm at enquiry |
Care & Handling
- Keep the track surface clean and free of dust; a single particle can block a hole or scratch a glider.
- Never slide a glider along the track with the pump switched off.
- Store the track supported along its length so it does not bend.
- Check the pump hose connections and electrical lead before each session.
Why Choose LabEquip
College and senior-school departments buy an air track as core mechanics lab equipment, because it gives clean data for momentum and Newton’s laws that ordinary trolleys cannot. LabEquip lists it among its physics equipment; a digital stop watch suits simple timing, and set contents and accessories can be discussed through the contact page.
Frequently Asked Questions
How is the track levelled?
Switch on the pump and place a glider in the middle. Adjust the feet until the glider stays still or drifts slowly without favouring either direction, then check at a few positions along the track.
Why does a glider keep moving at a steady speed?
With no sliding friction, there is almost no horizontal force on a glider on a level track. By Newton’s first law it continues at constant velocity until it reaches the end.
How can momentum conservation be shown?
Two gliders of measured masses collide, either bouncing off spring buffers or sticking together. Timing each glider before and after the collision lets students compare total momentum before and after.
Can g be measured with this apparatus?
Yes. Raise one end by a known height to tilt the track by a small angle. The glider accelerates at g times the sine of the angle, so measuring the acceleration gives g.
What happens if the air flow is too weak?
Gliders drag on the track, slow down and give poor results. Check that the pump is running fully, the hose is secure and no holes are blocked.
Which timing method gives the most useful results?
Photogates with an electronic timer give the most precise speeds. Stopwatches over marked distances work for slower motion, and video analysis suits schools without gates.
Last Updated: October 2026










Reviews
There are no reviews yet.