Search

In Stock

Inclined Plane, Metal with Track

Precision-Milled Scale Integration: Features a 600mm anodized aluminum track with a laser-etched linear scale and an integrated 0-45° protractor, enabling sub-degree angular positioning for exact vector force resolution.

Low-Friction Pulley Assembly: Equipped with a height-adjustable, ball-bearing pulley and a chrome-plated steel slider to ensure uniform surface-to-surface interaction and minimal parasitic resistance during kinetic energy experiments.

₹540.00

Quick Answer: The Inclined Plane, Metal with Track is a physics apparatus in which a rigid metal plane, raised to a chosen angle, carries a guide track so that a roller, ball or small trolley runs straight down the slope. Students use this inclined plane with track to study the component of weight along a slope, accelerated motion and friction.

What the Track Adds to a Metal Inclined Plane

On a plain board, a ball or roller released at the top tends to wander sideways, and part of every run is lost to steering and rubbing against the edges. The metal inclined plane with track solves this by guiding the moving body along a straight channel, so its whole path lies along the line of greatest slope. Distances measured along the track are then the true distances travelled, which matters when students compare them with the predictions of the equations of motion.

A metal plane also stays flat. Wooden boards can warp with humidity, putting a slight dip or hump in the surface that changes the speed of a rolling ball part-way down. A rigid metal surface keeps the slope uniform from end to end, so the angle read at the hinge, or calculated from the height and length, applies to the whole run.

The angle is the variable that ties the experiments together. The component of the weight W acting down the slope is W sin θ, and the component pressing into the surface is W cos θ. Raising the plane increases the first and reduces the second, so objects accelerate faster on steeper slopes while the friction available to hold a block back falls.

Experiments on the Inclined Plane

  • Measuring the force parallel to the slope needed to hold a roller still and comparing it with W sin θ
  • Galileo’s experiment: marking the distances a ball rolls in equal time intervals and showing that the gaps grow as 1, 3, 5, 7
  • Finding the angle of repose for blocks of wood, felt or rubber, giving the coefficient of static friction as tan θ
  • Racing a solid ball against a hollow cylinder to show that the way mass is distributed changes rolling acceleration

Specifications

Apparatus Inclined plane with a guide track for rolling or sliding bodies
Construction Metal plane, as named in the title
Variable Angle of inclination, set by raising the plane
Principle Weight resolved into W sin θ along the slope and W cos θ into the surface
Roller, pulley, scale pan and angle scale supplied Confirm at enquiry

Care & Handling

  • Wipe the inclined plane track with a dry cloth before each session; grit in the channel makes a rolling ball bounce and adds friction.
  • Tighten the angle lock or support firmly before timing runs, so the slope does not creep down as balls are released.
  • Catch balls and rollers at the foot of the track with a soft stop or a box, to protect the metal ends and keep heavy balls off the floor.
  • Store the plane flat or hung on a wall, not leaning under other equipment that could bend the track.

Why Choose LabEquip

Physics departments order the metal inclined plane with track for mechanics practicals on forces along a slope and accelerated motion, often together with stopwatches and slotted masses. It sits in LabEquip’s physics lab equipment range, where the smaller adjustable inclined plane model suits younger classes. Share quantities and the accessories you need through the contact page.

Frequently Asked Questions

Why does the inclined plane need a track?

The track keeps a ball or roller moving in a straight line down the steepest part of the slope. Without it, the body drifts sideways, travels further than the measured distance and may rub against the edges, so timed results scatter and no longer match the equations of motion.

How do I find the angle of the plane if there is no scale?

Measure the height h of the raised end above the base line and the length L of the plane between the hinge and that point. Then sin θ = h/L. Using the ratio directly avoids reading a small protractor and is usually more accurate.

How is the coefficient of friction found on an inclined plane?

Place a block on the plane and raise the angle slowly until the block just starts to slide. At that angle, called the angle of repose, the coefficient of static friction equals tan θ. Repeat several times, and again with the block turned onto a different face.

Why does a rolling ball accelerate less than the theory for a sliding object?

Part of the lost potential energy turns the ball rather than moving it down the slope. For a solid ball rolling without slipping the acceleration is five-sevenths of g sin θ, so results that seem low are often correct physics rather than error.

Can the plane show Galileo’s law of falling bodies?

Yes. Release a ball from rest and mark where it is at equal time intervals, using a metronome, a pendulum beat or a stopwatch. The distances from the start grow as 1, 4, 9, 16, so the gaps between marks run 1, 3, 5, 7, showing uniform acceleration.

Which angle suits timed runs?

Fairly small angles. A steep slope makes the ball reach the bottom too quickly to time well by hand. A gentle slope gives runs of a few seconds that can be timed reliably, and it keeps the ball rolling rather than skidding.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)