Search

In Stock

Flywheel

High-Inertia Balanced Rotor: Features a heavy-duty, cast-iron wheel mounted on a precision-ground steel axle, specifically engineered to maintain significant angular momentum while minimizing dissipative energy loss during experimental cycles.

Low-Friction Ball-Bearing Suspension: Equipped with industrial-grade, low-resistance bearings and a dual-reference index pointer, ensuring high-resolution tracking of rotations for the accurate calculation of frictional torque and rotational dynamics.

₹2,100.00

Quick Answer: A flywheel apparatus is a heavy wheel mounted on a horizontal axle in bearings, set spinning by a mass that falls while unwinding a cord from the axle. It is used to determine the moment of inertia of the wheel from energy measurements, including a correction for friction.

From Falling Mass to Spinning Wheel

The wheel is fixed to the wall or a bench bracket so that its axle is horizontal. A cord with a loop at one end is slipped over a pin on the axle and wound round it a counted number of turns, and a mass hangs from the free end. When the mass is released it falls, unwinding the cord and spinning the wheel faster and faster, until the cord slips off the pin at the end of its last turn.

During the fall, the potential energy lost by the mass is shared three ways: kinetic energy of the falling mass, rotational kinetic energy of the wheel, and work done against friction in the bearings. After the cord detaches, the wheel keeps turning and gradually stops, and counting those extra rotations and timing them gives both the friction loss per rotation and the wheel’s angular speed at the moment of detachment.

Because the wheel slows uniformly, its angular speed at detachment is twice its average angular speed during the slowing-down, which comes from the number of rotations and the time taken. With that speed, the energy equation can be solved for the moment of inertia.

Applications

  • Determining the moment of inertia of a flywheel by the energy method
  • Measuring the frictional loss in the bearings per rotation
  • Demonstrating conservation of energy in rotational motion
  • Discussing why heavy flywheels smooth out the running of engines

Specifications

Type Flywheel on a horizontal axle in bearings
Mounting Wall or bench bracket
Drive Mass on a cord wound round the axle and released
Quantity found Moment of inertia of the flywheel
Wheel size and accessories Confirm at enquiry

Practical Points

Make sure the cord leaves the axle cleanly; it should be just long enough that it slips off the pin as the mass reaches its lowest point. A reference mark on the rim and a fixed pointer make the rotations easy to count. Repeat with different numbers of windings, and compare the result with a calculation from the wheel’s mass and radius.

Care & Handling

  • Mount the bracket firmly so the wheel cannot wobble at speed.
  • Keep hands and loose sleeves away from the spinning wheel and the falling mass.
  • Oil or clean the bearings as needed so friction stays low and consistent.
  • Place a soft pad under the falling mass in case the cord does not detach.

Why Choose LabEquip

Physics departments buy the flywheel apparatus as standard mechanics lab equipment for rotational dynamics, often with a bifilar pendulum for comparison of methods. LabEquip lists it in its physics lab equipment, and the wheel size can be confirmed through our contact page.

Frequently Asked Questions

Why is friction measured separately?

Some of the falling mass’s energy is used against friction in the bearings. Counting how many turns the wheel makes after the cord detaches lets that frictional loss per turn be found and included in the calculation.

Why must the cord detach from the axle?

Once it detaches, the wheel runs freely and slows only because of friction. Those free rotations provide the friction loss and the wheel’s speed at the moment of detachment.

How is the angular speed at detachment found?

The wheel slows uniformly to rest, so its initial angular speed is twice its average. The average is found from the number of rotations after detachment and the time they take.

Can the moment of inertia be checked by calculation?

Yes. For a wheel close to a uniform disc, half the mass times the square of the radius gives an estimate to compare with the experimental value.

Is the flywheel safe for student use?

Yes, with supervision. Keep fingers and clothing away from the rim while it spins and make sure the falling mass lands on a soft pad.

Where are flywheels used outside the laboratory?

In engines, presses and energy storage systems, where their large moment of inertia keeps rotation steady and stores kinetic energy.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)