Quick Answer: A dynamic trolley with track is a set of low-friction wheeled trolleys and a wooden runway for school mechanics experiments. The trolleys are used to study force and acceleration, and their spring plungers allow collision and explosion experiments on the conservation of momentum.
Trolleys, Runway and Plunger
Each trolley is a solid block on free-running wheels, made heavy enough to roll steadily but light enough to accelerate noticeably under a small pull. Catalogue versions of this set commonly fit a spring-loaded plunger, or impulse rod, to the front of the trolley. Pushed in and latched, the plunger stores energy; released, it pushes against whatever is in front, whether another trolley or an end stop.
The wooden runway gives a long, flat, smooth path. Raised slightly at one end, it can be tilted just enough for a trolley to run down at constant speed once given a push. At that angle the component of the trolley’s weight down the slope balances friction, so any further pull produces acceleration that is due to the applied force alone. This friction-compensated runway is the starting point for quantitative work.
The number of trolleys and accessories in the set, such as elastic cords and spare wheels, should be confirmed at enquiry.
Classic Experiments
For Newton’s second law, the trolley is pulled down the compensated runway by an elastic cord kept at a constant stretch, while a ticker tape timer records its motion. Using one, two and then three identical cords in parallel doubles and triples the force, and the acceleration found from the tape rises in step. Stacking a second trolley on the first doubles the mass and halves the acceleration.
For an explosion, two trolleys stand together with the plunger of one compressed against the other. When it is released they fly apart, and the distances they travel in the same time are inversely proportional to their masses, so their momenta are equal and opposite. Collisions, in which a moving trolley strikes a stationary one and they move off together, show total momentum conserved.
Specifications
| Type | Dynamics trolleys with wooden runway |
| Trolleys | Wheeled trolleys with spring-loaded plunger |
| Runway | Wooden track, can be tilted for friction compensation |
| Timing | Ticker tape timer, light gates or stopwatch |
| Number of trolleys and accessories | Confirm at enquiry |
Applications
- Verifying that acceleration is proportional to force and inversely proportional to mass
- Explosion experiments showing equal and opposite momenta
- Collisions in which trolleys stick together, testing conservation of momentum
- Measuring acceleration down an inclined runway
Care & Handling
- Keep wheels free of fluff and grit and check that they spin freely before each class.
- Release plungers by their trigger, never by hand, and keep fingers clear of the spring.
- Store the runway flat to prevent warping, which makes trolleys veer or slow unevenly.
- Place a stop or soft barrier at the end of the runway so trolleys do not fall off.
Why Choose LabEquip
Secondary schools buy the dynamic trolley with track because one set supports most of the force and momentum practicals in their syllabus. LabEquip lists it with its physics lab equipment, along with a lighter plastic dynamic trolley for extra benches, and set contents can be confirmed through our contact page.
Frequently Asked Questions
What is a friction-compensated runway?
A runway tilted just enough that a trolley, once pushed, rolls down at constant speed. The slope cancels friction, so any extra force on the trolley produces acceleration that depends on that force alone.
How does the spring plunger work?
The plunger is pushed into the trolley and latched, compressing a spring. When the trigger is pressed, the spring pushes the plunger out against a second trolley or a stop, giving an impulse for explosion and collision experiments.
How can a constant force be applied to a trolley?
Pull the trolley with an elastic cord stretched to the same length throughout the run, walking alongside it. Two or three identical cords in parallel give two or three times the force.
How is acceleration measured?
Commonly with a ticker tape timer: the dots on the tape are made at equal time intervals, so the change in spacing between groups of dots gives the change in velocity and hence the acceleration.
What does the explosion experiment show?
When two trolleys spring apart from rest, their momenta are equal in size and opposite in direction. Total momentum stays zero, as it was before the release.
Can the runway be used without the trolleys from this set?
Yes, any trolley of suitable width can run on it, including a ballistic car or a separate plastic trolley, provided the wheels sit squarely on the runway.
Last Updated: October 2026










Reviews
There are no reviews yet.