Search

In Stock

Moving Coil Meter, Round Dial, Front Terminal (Ammeters, Milli-Ammeters, Micro-Ammeters, Voltmeters and Galvanometer)

High-Coercivity PMMC Movement: Engineered with a precision permanent magnet moving coil system and sapphire jewel bearings to minimize rotational friction, ensuring a linear scale response with ±2.0% full-scale accuracy across all DC ranges.

Universal Safety Connectivity: Equipped with high-visibility 4mm shrouded terminals or heavy-duty binding posts, designed for low-resistance integration into complex benchtop circuits to measure micro-amps, milli-amps, or multi-range voltage potentials.

₹780.00

Quick Answer: This round dial moving coil meter is a DC instrument with a circular dial and terminals on its front face, offered as an ammeter, milliammeter, microammeter, voltmeter or galvanometer. All five versions rest on one moving-coil movement; what changes from one to the next is the resistance connected to the coil.

How One Movement Becomes Five Meters

The moving coil itself is a galvanometer: it needs only a small current for full-scale deflection and has a definite resistance of its own. To make an ammeter, a low-resistance shunt is connected across the coil so that most of the current bypasses it. If the meter must read ten times the coil’s own full-scale current, the shunt needs one-ninth of the coil’s resistance, so that nine parts of the current go through the shunt for every one through the coil.

The smaller the current to be measured, the less shunting is needed. A milliammeter uses a modest shunt, a microammeter uses little or none, and the galvanometer version is the bare sensitive movement, usually with its zero in the middle of the scale. A voltmeter takes the opposite approach: a high resistance, the multiplier, is placed in series with the coil so that the full-scale current flows only when the intended voltage is applied.

Students often meet these ideas in the practical on converting a galvanometer into an ammeter and a voltmeter, using a decade resistance box as the shunt or the series resistance.

Round Dial, Front Terminals

The circular dial keeps the case compact while giving the pointer a curved scale, and the terminals sit on the front face below the dial, where they are easy to reach from the bench. The positive terminal is marked so that the meter is connected the right way round.

Specifications

Type Moving-coil meter for direct current
Dial Round
Terminals Front face, polarity marked
Versions Ammeter, milliammeter, microammeter, voltmeter and galvanometer
Range and scale of each version Confirm at enquiry

Applications

  • Converting a galvanometer into an ammeter or voltmeter in a student practical
  • Measuring currents and voltages in simple series and parallel circuits
  • Measuring small currents from photocells or thermocouples with the microammeter version
  • Investigating resistances in series and in parallel

Care & Handling

  • Connect ammeters in series and voltmeters in parallel; never place an ammeter directly across a supply.
  • Use the highest range first when the size of a current is unknown.
  • Store meters at rest in a dry place and keep them away from magnets.
  • Check that the pointer returns to zero after use; a pointer that sticks needs attention before the next class.

Why Choose LabEquip

Schools and colleges stock the round dial moving coil meter in several versions so that every bench has the right ammeter, voltmeter or galvanometer for the practical in hand. LabEquip supplies it as part of its physics lab equipment, and you can plan a mixed set of ranges through our contact page.

Frequently Asked Questions

What is the difference between a milliammeter and a microammeter?

Both are moving-coil current meters. A milliammeter reads currents in thousandths of an ampere and uses a shunt; a microammeter reads millionths of an ampere and uses the movement with little or no shunt, so it is far more sensitive.

Why must an ammeter be connected in series?

An ammeter measures the current flowing through it, so the current must pass through the meter. Its resistance is kept low so that inserting it in series hardly changes that current.

What happens if an ammeter is connected directly across a battery?

Its very low resistance allows a large current to flow, which can overheat the shunt, bend the pointer against its stop or burn out the coil. Always place a load in series with an ammeter.

How is a galvanometer converted into a voltmeter?

A high resistance is connected in series with the galvanometer. Its value is chosen so that the full-scale current flows when the required voltage is applied, minus the galvanometer’s own resistance.

Is the round dial version less accurate than the rectangular one?

Dial shape is mainly a matter of layout and case size. Accuracy depends on the movement and scale, so compare the specification of the particular versions rather than the dial shape alone.

Can I use the galvanometer version to detect current direction?

Yes. With its zero in the centre, the pointer moves one way for current in one direction and the other way when the current reverses, which is useful in induction experiments.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)