Search

In Stock

Demonstration Meter, Vertical

High-Sensitivity PMMC Movement: Features a permanent magnet moving coil assembly with sapphire jewel bearings, minimizing rotational friction to ensure a linear response and high-fidelity measurement across the entire frequency range.

Interchangeable Dual-Scale System: Equipped with a 200mm high-contrast vertical dial and a modular rear-loading slot, allowing the base unit to function as a multi-range Voltmeter, Ammeter, or Galvanometer via external shunts.

₹475.00

Quick Answer: A vertical demonstration meter is a large analogue meter whose dial stands upright on the lecture bench, so that a whole class can read the pointer while the teacher builds a circuit. It is used as an oversized ammeter, voltmeter or galvanometer for electricity demonstrations.

Built to Be Read from the Back Row

Ordinary bench meters are designed to be read by one person from close range, and their scales are too small to follow from a distance. The vertical demonstration meter turns the dial to face the room and enlarges the pointer and scale markings, so the reading is clear to students several metres away. Standing upright on the bench, it also leaves the teacher’s hands and the circuit board in plain view beside it.

Inside, a demonstration meter works like any analogue meter: a current through the movement produces a deflection proportional to that current, and resistors inside or attached to the meter set its range and whether it reads current or voltage. Whether the supplied meter reads current, voltage or both, and on which ranges, should be confirmed at enquiry so it matches the demonstrations planned.

Teachers often use two such meters together, one as an ammeter in series and one as a voltmeter across a component, so that the class can see both readings change at the same moment as a rheostat is adjusted.

Specifications

Type Demonstration meter with upright, large-format dial
Purpose Whole-class reading of current or voltage
Display Analogue pointer over an enlarged scale
Placement Stands on the lecture bench facing the class
Function and ranges Confirm at enquiry

Classroom Demonstrations

  • Showing Ohm’s law readings live as the voltage across a resistor is increased
  • Demonstrating how current divides between parallel branches
  • Showing the fall in terminal voltage of a cell as more current is drawn
  • Following the charging and discharging of a capacitor through a large resistor

Setting Up a Demonstration

Place the meter where the whole class has a direct line of sight, ideally at the same height as the circuit so students do not need to look between two places. Check the pointer rests on zero before connecting, wire the meter in series for current or in parallel for voltage, and note the polarity marked on the terminals. A nichrome rheostat in the circuit gives smooth changes that the class can follow on the dial.

Care & Handling

  • Stand the meter on a firm, level surface so it cannot be knocked over during a demonstration.
  • Check the zero before each lesson and correct it with the zero adjuster if fitted.
  • Connect with the correct polarity and an adequate range to protect the movement.
  • Dust the dial face with a soft dry cloth; solvents can cloud plastic windows.

Why Choose LabEquip

Schools buy the vertical demonstration meter to make electricity lessons visible to a full class, and many pair it with an interscale demonstration meter for lessons on how meters work. It is part of LabEquip’s physics lab equipment, and the function and ranges for your order can be agreed through our contact page.

Frequently Asked Questions

What is the advantage of a vertical dial?

An upright dial faces the class, so every student can see the pointer at the same time. Flat bench meters can only be read clearly by someone standing over them.

Can the same meter measure both current and voltage?

That depends on the model and its ranges. Some demonstration meters read one quantity, others change function with plug-in resistors or selectable ranges, so confirm the function when you order.

How should it be connected to measure current?

Connect it in series with the component, so the same current passes through the meter. Observe the polarity marks on the terminals and choose a range larger than the expected current.

Why use two demonstration meters at once?

With one meter as an ammeter and another as a voltmeter, the class can watch both quantities change together, which makes relationships such as Ohm’s law easy to see.

Is a demonstration meter as accurate as a bench meter?

It is designed mainly for visibility. For readings that students will record and graph, small bench meters or digital meters at each workstation are usually more convenient.

What should I do if the pointer does not rest on zero?

Use the zero adjuster on the meter, if one is fitted, with the meter disconnected. If the pointer still sticks or will not return, the movement may need servicing before use.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)