Search

In Stock

Prism Hollow, Glass

Chemical-Resistant Hermetic Bonding: Constructed from high-clarity glass plates fused with inert, leak-proof adhesive, ensuring structural integrity when containing volatile organic solvents or aqueous solutions for long-duration refractometry.

Precision Equilateral Geometry: Features a standardized 60° x 60° x 60° angular configuration with optically flat surfaces to minimize beam deviation errors and ensure high-fidelity spectral resolution during minimum deviation experiments.

₹524.00

Quick Answer: The Prism Hollow, Glass is a triangular vessel whose walls are flat glass plates, filled with a liquid so that the liquid itself acts as the prism. A hollow glass prism is used with a spectrometer, or with pins on a drawing board, to find the refractive index of water and other transparent liquids by the minimum deviation method.

Turning a Liquid into a Prism

Each wall of the hollow prism is a thin plate with parallel faces. A ray passing through a parallel-sided plate is shifted sideways but leaves in its original direction, so the walls themselves add almost no deviation. Fill the prism and the wedge of liquid does the bending, with the refracting angle A set by the angle between the two walls. An empty hollow prism placed in a ray shows this neatly: the ray goes straight through.

On a spectrometer, the angle A is measured by reflecting light from the two outer faces, and the prism table is then turned until the refracted image stops and turns back. That turning point is the angle of minimum deviation Dm, and the refractive index of the liquid is n = sin((A + Dm)/2) / sin(A/2). A sodium lamp gives the index for yellow light; a mercury lamp gives several lines and so the dispersion of the liquid.

Schools without a spectrometer can use the pin method on a drawing board, plotting deviation against angle of incidence as with a solid glass prism. Water, salt solutions and sugar solutions of known strength are the usual samples, and a set of sugar solutions gives a calibration line of refractive index against concentration.

Care & Handling

  • Fill slowly down one wall with a dropper so that bubbles do not cling to the glass.
  • Empty, rinse with distilled water and dry after every use; dried sugar or salt leaves a film.
  • If the plates are joined with cement, check that a liquid will not soften the joints before using it.
  • Never heat the prism or fill it with hot liquid.

Specifications

Type Hollow prism with glass walls
Sample Holds a liquid as the refracting medium
Quantity measured Refractive index of the liquid by minimum deviation
Used with Spectrometer or pin method; sodium or mercury lamp
Wall thickness, refracting angle and size Confirm at enquiry

Applications

  • Refractive index of water
  • Refractive index of salt or sugar solutions against concentration
  • Comparing the dispersion of different liquids
  • Showing that an empty hollow prism hardly deviates a ray

Why Choose LabEquip

College laboratories and senior school groups who measure liquid refractive indices, by spectrometer or by pins, are the usual buyers. LabEquip lists the hollow prism beside its solid prisms in the physics lab equipment range; use the contact page to order one for each spectrometer.

Frequently Asked Questions

Do the glass walls affect the result?

Very little. Each wall is a thin parallel-sided plate, which shifts a ray sideways but does not change its direction, so the deviation measured is caused by the liquid.

Which liquids can be tested?

Water, salt solutions and sugar solutions are the usual choices. Avoid liquids that could attack the joints of the prism, and keep volatile, flammable liquids away from lamps.

How do I find the angle of minimum deviation?

Watch the refracted image through the telescope while slowly turning the prism table. The image moves, stops and then turns back; read the angle at the stopping point.

What is the formula for the refractive index?

n equals the sine of half the sum of A and Dm, divided by the sine of half A, where A is the refracting angle of the prism and Dm the angle of minimum deviation.

Why do air bubbles matter?

Bubbles clinging to the walls scatter and bend light, blurring the image of the slit. Fill the prism slowly down one wall and tap it gently to release trapped air.

Can the strength of a sugar solution be found this way?

Yes. Refractive index rises with concentration, so measuring several known solutions and plotting n against concentration gives a line from which an unknown solution can be read.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)