Quick Answer: The Overflow Vessel (Eureka Can), Metal is a metal can with a downward-pointing spout near its rim, filled with water to the spout level so that any object lowered into it pushes out its own volume of water. Collected and measured, that water gives the volume of an irregular solid or the weight of liquid displaced in Archimedes’ principle experiments.
Using a Eureka Can Correctly
The technique matters more than the can. Fill the vessel past the spout and let the excess drain away until dripping stops; the water surface then sits exactly at the spout’s lip. Place a dry measuring cylinder or weighed beaker under the spout, lower the object gently on a thread until it is fully submerged, and wait for the last drop. The water collected has the same volume as the object.
For Archimedes’ principle, the object hangs from a spring balance throughout. The drop in the balance reading when the object is submerged is the upthrust; weighing the displaced water shows that it equals that upthrust. A metal eureka can is stable on the bench, unaffected by hot water and hard to damage, so it suits regular class use, and its rigid spout keeps its shape so the overflow level stays consistent from lesson to lesson.
Some water always clings inside the spout, so the method works better for objects that are not too small, where that loss is a small fraction of the total. The metal, capacity and spout design of this can are not given in the title. The plastic version is lighter for younger students, and the brass bucket and cylinder give a balance-based proof of the same principle.
Experiments
- Finding the volume of an irregular solid such as a stone or a metal fitting
- Verifying Archimedes’ principle with a spring balance
- Determining the density of an irregular object from its mass and displaced volume
- Showing that a floating body displaces water equal to its weight
Specifications
| Type | Overflow (displacement) vessel with side spout |
| Material | Metal, as titled |
| Measures | Volume of irregular solids; weight of liquid displaced |
| Used with | Measuring cylinder or beaker, thread and spring balance |
| Metal, capacity and spout design | Confirm at enquiry |
Care & Handling
- Stand the can on a level surface so that the overflow level is the same each time.
- Wait until dripping has completely stopped before placing the collecting vessel.
- Dry the can inside and out after use to prevent tarnish or corrosion at the spout joint.
- Avoid denting the rim or bending the spout, which changes the overflow level.
Why Choose LabEquip
Schools and colleges choose a metal eureka can for a hard-wearing displacement vessel that stays steady on the bench through many classes. It is part of our Physics Equipments; contact LabEquip for capacity and material details.
Frequently Asked Questions
Why is it called a eureka can?
The name recalls the story of Archimedes, who is said to have shouted eureka when he realised that a body placed in water displaces its own volume. The can makes that displacement easy to collect and measure.
How do I prepare the can before measuring?
Fill it above the spout and let the surplus run out until the dripping stops completely. The water is then exactly at the overflow level, and only water pushed out by the object will be collected.
Can it be used for objects that float?
Yes. A floating object displaces a weight of water equal to its own weight, so the collected water, when weighed, equals the object’s weight. To find its volume instead, push it just under the surface with a thin rod.
Why might the collected volume be slightly low?
A little water clings to the inside of the spout and the can walls, and the surface may bulge slightly at the lip. These errors matter most for small objects, so use objects of reasonable size and repeat the measurement.
What are the advantages of a metal eureka can?
It is stable, resists knocks and is not affected by hot water, so it stands up to repeated class use. Its spout keeps its shape, giving a consistent overflow level.
Which collecting vessel should be used?
A measuring cylinder gives the displaced volume directly. For Archimedes’ principle, collect the water in a beaker weighed beforehand so the weight of displaced water can be compared with the upthrust.
Last Updated: October 2026










Reviews
There are no reviews yet.