Search

In Stock

Capacitance Box, Decade Type

Precision Dielectric Components: Features high-stability metalized film capacitors with a low dissipation factor, ensuring a typical tolerance accuracy of ±1% and high insulation resistance exceeding 1000 Megohms.

Low-Loss Switching Architecture: Housed in an electrostatic-shielded enclosure with multi-position rotary silver-plated brass switches that minimize residual contact resistance and provide tactile feedback for repeatable incremental dial adjustments.

₹1,820.00

Quick Answer: The Capacitance Box, Decade Type is a boxed set of capacitors switched into circuit in decade steps, so a chosen capacitance can be set without wiring separate components. A decade capacitance box is used in physics practicals on charging and discharging, RC time constants and AC circuits.

What a Decade Capacitance Box Does

Each selector on a decade box controls one decade: the first sets the smallest step and each following selector works in steps ten times larger. Setting the selectors builds the required value one digit at a time. Inside, the chosen capacitors are joined in parallel, because capacitances in parallel simply add.

That makes the box well suited to investigations in which capacitance is the variable. In a circuit with a fixed resistor the time constant equals resistance multiplied by capacitance, so doubling the setting doubles the time taken for a discharging capacitor’s voltage to fall to about 37 per cent of its starting value. In AC work the reactance of a capacitor falls as its capacitance rises, which students see as a rising current at a fixed frequency.

The listing title gives the decade type but not the capacitance range, the step size, the voltage rating or the kind of capacitor inside. Those values decide which experiments the box suits, so check the range against your practical scheme. A decade resistance box is the natural partner, giving a variable resistance alongside the variable capacitance.

Practicals

  • Measuring the RC time constant by timing a capacitor discharging through a known resistor
  • Plotting charging and discharging curves with a voltmeter and stopwatch or a data logger
  • Showing how capacitive reactance changes with capacitance in an AC circuit
  • Finding an unknown capacitance by substitution
  • Tuning a simple LC circuit to resonance

Specifications

Type Decade capacitance box
Selection One selector for each decade, in the usual design
Internal connection Selected capacitors add in parallel
Typical uses RC timing, AC reactance, substitution measurements
Range, step size and voltage rating Confirm at enquiry

Care & Handling

  • Never exceed the voltage rating marked on the box.
  • Discharge the box through a resistor before changing the setting or touching the terminals.
  • Do not connect it across the mains.
  • Keep it dry and store it with the selectors at zero.

Why Choose LabEquip

Senior school and first-year college physics laboratories buy decade capacitance boxes so that one piece of apparatus serves every RC and AC practical. LabEquip includes this box in its Physics Equipments range; tell us the capacitance range your syllabus needs through the contact page.

Frequently Asked Questions

What does decade type mean on a capacitance box?

The capacitance is set in decades. Each selector controls one power of ten, so the setting is built up digit by digit, much like writing a number. It gives both fine steps and large values from the same box.

How do I measure a time constant with this box?

Charge the capacitor from a low-voltage supply, then let it discharge through a known resistor while recording the voltage at regular intervals. The time for the voltage to drop to about 37 per cent of its starting value is the time constant, equal to resistance times capacitance.

Can the box be used in AC circuits?

Yes, within its voltage rating. At a fixed frequency, increasing the capacitance lowers the reactance and raises the current, so students can measure the current at several settings and compare it with the calculated reactance.

Are the capacitors inside polarised?

That depends on the capacitor type, which the listing does not state. Boxes intended for AC work use non-polarised capacitors. If a terminal is marked positive, respect that polarity in every DC circuit.

Why should the box be discharged before adjusting it?

A charged capacitor can hold its voltage for a long time after the supply is removed. Discharging it through a resistor first protects students from a shock and protects the selector contacts from sparking.

Can it find an unknown capacitance?

Yes, by substitution. Measure a quantity such as the discharge time with the unknown capacitor in circuit, then replace it with the box and adjust the setting until the same result is obtained. The box setting then equals the unknown value.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)