Quick Answer: The Safety Shower with Eye Wash is a combination emergency station for laboratories: an overhead drench shower, started by a pull handle, that rinses chemicals off the body and clothing, together with an eye wash for flushing the eyes, both fed from the water supply.
Body and Eyes at One Station
An eye wash deals with splashes to the face, but a spilled beaker, a failed bottle or a burst hose can soak a sleeve, a lab coat or the whole front of the body. A drench shower delivers a large volume of water from overhead so that the chemical is diluted and carried away quickly. Contaminated clothing, shoes and jewellery should be removed under the running water, which is why a screen or curtain near the shower is worth planning.
A safety shower with eye wash usually stands on the floor on a vertical pipe, with the shower head above head height, pulled on by a hanging rod or ring, and the eye wash at about chest height with a push paddle. Both valves typically stay open once operated, leaving the user’s hands free. The listing gives no dimensions, material or valve details, so confirm them, together with the connection size, at the order stage.
The commonest planning mistake is drainage. The shower releases far more water than a sink, and many labs have no floor drain; without one, every weekly test becomes a flood, so plan a drain or use a test bucket for routine checks. Site the station close to acid, alkali and solvent handling areas, reachable within seconds, and away from sockets and equipment that must stay dry. For a wall unit covering the eyes only, see the Eye Wash, Wall Mounted.
Care & Handling
- Operate the shower and eye wash weekly, into a drain or a test bucket, to flush stagnant water and prove the valves.
- Keep a clear space around the station and never let it become a storage corner.
- Check that the pull rod and push paddle return fully and do not drip after testing.
- Protect exposed pipework from freezing in unheated buildings, and keep the area well lit and signposted.
Applications
- Pharmaceutical production and quality-control labs handling corrosive or toxic chemicals in quantity.
- Chemical stores, dispensing rooms and waste-handling areas.
- University and college chemistry labs where large volumes of reagents are used.
- Battery rooms, plating shops and industrial training workshops that handle acids.
Specifications
| Item | Combination drench shower and eye wash |
| Shower | Overhead head, typically pull-rod or ring operated |
| Eye wash | Separate outlet for flushing the eyes |
| Valves | Normally stay open once pulled or pushed |
| Water supply | Plumbed; lukewarm water is widely recommended |
| Dimensions, material and connection size | Confirm at enquiry |
Why Choose LabEquip
Pharmaceutical plants, university chemistry departments and chemical stores buy combination stations for areas where a spill could affect more than the eyes. The unit appears in LabEquip’s General Lab Products range; drainage and connection questions can be raised through the contact page.
Frequently Asked Questions
When is a safety shower needed as well as an eye wash?
Where a spill or splash could reach the body or clothing, not just the face, for example when large volumes of acids, alkalis or other corrosive or toxic chemicals are handled. The shower rinses the body while the eye wash treats the eyes.
How is the safety shower operated?
Combination units usually have a pull rod or ring hanging from the shower head. One pull starts the flow, which normally stays on until it is shut off, so the person can use both hands to remove contaminated clothing.
Should contaminated clothing be removed in the shower?
Yes. Clothing, shoes and jewellery that have absorbed chemicals keep them against the skin, so they should come off under the running water. A screen or curtain nearby helps people do this without delay.
What drainage does a safety shower need?
A floor drain is strongly advisable because the shower releases a large volume of water. Where there is none, routine tests can be run into a bucket, and the floor should be planned for occasional full use.
Can the safety shower be used if clothing catches fire?
A drench shower can put out burning clothing, but it may be further away than a fire blanket, and the stop, drop and roll method is often quicker. Follow the lab’s fire procedure and training.
How often should the station be tested?
Operate both parts every week so that the stagnant water in the pipes is replaced and the valves are proven, noting each check in a log. The safety policy should also fix how often a full inspection is carried out.
Last Updated: September 2026










Reviews
There are no reviews yet.