Quick Answer: The Double Elbow Action Surgical Basin Mixer, Pillar Type is a deck-mounted mixer tap with two long elbow levers, one for hot and one for cold water, feeding a single spout, so users can set a comfortable temperature at a handwash basin without touching the fitting with their hands.
Two Levers, One Spout
A pillar mixer stands on the basin or counter top and is fed from below by two supply pipes. On this elbow action basin mixer each supply has its own long lever, set on either side of the body, and the two streams meet in a shared spout. Opening one lever further than the other changes the blend, so warm water can be delivered for thorough washing without scalding or cold-water discomfort.
The word ‘surgical’ in the product name refers to the style, which grew out of hospital scrub rooms where staff wash to the elbow and must not touch fittings afterwards. On this listing it describes the lever pattern, not a medical-device approval. In laboratories the same pattern suits handwash basins serving microbiology and pathology rooms, where users arrive at the sink with gloved or contaminated hands.
Compared with the single-supply Elbow Action Bib Cock, which mounts on the wall and gives one temperature, the double lever mixer needs both hot and cold lines rising through the deck. Spout reach also matters more here: a longer spout keeps the stream away from the back of the basin so that forearms can be rinsed.
Specifications
| Item | Basin mixer with two elbow-action levers |
| Mounting | Pillar type: stands on the basin or counter deck, fed from below |
| Supplies | Separate hot and cold inlets, mixed in a single spout |
| Operation | Levers moved with the elbow or forearm |
| Spout length, body material and connections | Confirm at enquiry |
Care & Handling
- Flush both supply lines before connecting the mixer, so grit from new pipework does not lodge in the valves.
- Fit isolating valves under the basin on the hot and cold lines, so the mixer can be serviced without shutting off the building supply.
- Measure the hot-water temperature at the spout after installation; where scalding is a concern, a thermostatic control upstream is advisable.
- Clean levers and spout with detergent and a surface disinfectant, and descale the outlet if the flow becomes uneven.
Typical Installations
- Handwash basins beside microbiology, virology and tissue-culture rooms.
- Pathology and sample-collection areas where staff wash between patients or samples.
- Nursing and medical training labs that demonstrate the surgical handwash sequence.
- Veterinary and animal-house wash points, where warm water encourages thorough washing.
Why Choose LabEquip
Hospitals, diagnostic labs, nursing colleges and university life-science blocks are the usual buyers of a double elbow mixer, often for a new handwash area. LabEquip lists it with other sink fittings under General Lab Products; send basin details and quantities through our contact page so that the connections can be matched.
Frequently Asked Questions
What does pillar type mean for a basin mixer?
It means the mixer stands upright on the basin or counter and its supply pipes come up from underneath. A wall-type mixer, by contrast, is fixed to the wall with its pipes concealed behind it.
Why does the mixer have two levers?
One lever controls the hot supply and the other the cold supply. Opening each by a different amount sets the temperature, and both are long enough to move with the elbow so hands stay clean.
Is this basin mixer approved as a medical device?
No approval is claimed. ‘Surgical’ describes the hospital-style elbow lever pattern. Hospitals that need specific approvals for scrub areas should compare it with their own specification before ordering.
Can the mixer be used with only a cold supply?
Yes, it will work with one lever connected to a cold line, but a single elbow tap is simpler in that case. The double lever layout is worth fitting where warm water is available.
How is scalding prevented at a mixer tap?
The mixer blends whatever temperatures reach it, so scald protection is normally provided upstream by a thermostatic mixing valve or by limiting the stored hot-water temperature. Test the outlet temperature after fitting.
What maintenance does an elbow mixer need?
Occasional descaling of the spout, cleaning of the levers, and replacement of washers or cartridges if a lever drips when closed. Isolating valves under the basin make this work quick.
Last Updated: September 2026










Reviews
There are no reviews yet.