Search

In Stock

Rubber Corks, Assorted

Standardized Tapered Geometry: Each stopper is precision-molded with a specific taper angle to provide high-friction retention and a hermetic seal within standard ISO-compliant narrow-neck borosilicate containers.

Thermal and Elastic Resilience: Manufactured with a Shore A durometer rating between 45 and 55, these stoppers maintain elasticity across a wide temperature range, resisting brittle failure during repeated sterilization cycles.

₹350.00

Quick Answer: Rubber Corks, Assorted is a mixed collection of rubber stoppers in several sizes, supplied together rather than as one size. Assorted rubber stoppers let a prep room fit test tubes, boiling tubes, flasks and bottles without ordering each size separately.

Why Buy Stoppers as a Mix

A single school lab can hold glassware with a dozen different neck sizes: narrow test tubes, wider boiling tubes, conical and flat-bottom flasks, reagent bottles and odd items such as U-tubes. Buying one size at a time for each vessel is slow, and a technician setting up an unfamiliar practical needs a stopper that fits now. An assortment covers the common range in one purchase and makes a sensible starting stock for a new or re-equipped lab.

Stoppers are generally identified by a size number and by their top and bottom diameters. Matching is done against the inside diameter of the neck: the small end must enter and the large end must not. Sorting the assortment into labelled compartments on arrival saves time in every later lesson.

Whether the mix includes bored as well as solid stoppers, and which sizes it spans, should be settled before ordering. Bored stoppers are also sold individually, including the one hole and two hole types.

Applications

  • Initial stock for a new school chemistry or biology prep room
  • Replacing lost or perished stoppers across mixed glassware
  • Fitting unusual vessels, such as U-tubes or side-arm tubes, that need a size not already on the shelf
  • Practical examinations where many benches need closures at short notice

Sorting & Storage

  • Sort stoppers by size into a compartment box or labelled jars as soon as they arrive.
  • Measure the inside neck diameter of each glassware type once and note the matching size on the shelf label.
  • Keep the collection in a closed container away from light, heat and motors.
  • Check the stock each term and remove any that have hardened, cracked or become sticky.

Specifications

Contents Rubber stoppers in mixed sizes
Material Rubber; compound not specified
Glassware covered Test tubes, boiling tubes, flasks and bottles within the size range
Identification Usually by size number and top and bottom diameter
Size range, quantity and bored or solid mix Confirm at enquiry

Why Choose LabEquip

Assortments are popular with schools setting up a lab from scratch and with technicians who manage glassware bought from different sources. LabEquip supplies them within General Lab Products; if you share a list of the glassware to be fitted on the contact page, the sizes in the mix can be checked against it.

Frequently Asked Questions

How are rubber stopper sizes described?

Most suppliers use a size number together with the top diameter, bottom diameter and length. Numbering schemes differ between makers, so compare diameters rather than numbers when mixing stock from different sources.

How do I find which stopper fits a flask?

Measure the inside diameter of the neck with a ruler or caliper. Pick a stopper whose bottom diameter is a little smaller and whose top diameter is clearly larger than that measurement.

Can I bore my own holes in solid stoppers?

Yes, with a cork borer of the right size, lubricated with water or glycerol and turned steadily while pressing lightly. Bore from the narrow end with the stopper resting on a wooden board, and keep the borer edge sharp.

Do assorted stoppers include one and two hole types?

It depends on the assortment. Some mixes contain only solid stoppers, others add bored ones. Confirm the mix when you enquire, or order bored stoppers separately in the sizes you use most.

How long do rubber stoppers last?

Life depends on use and storage. Heat, sunlight, ozone and solvents harden or soften rubber, while stoppers kept clean in a dark, closed box can serve for years. Replace any that crack or stop springing back.

Can stoppers from the assortment be used for heating?

Only as part of an open system, such as a bored stopper with a delivery tube or condenser leading to air. Never heat a vessel sealed with a solid stopper.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)