Quick Answer: Density blocks are solid blocks of different materials that students measure with a ruler, weigh on a balance and use to calculate density. They show that density is a property of the material rather than of the object’s size, and they can be tested for floating or sinking in water.
Working Out Density from a Block
Whatever the final mix, the method is the same. Students measure the length, width and height of a block, multiply them for the volume, weigh the block and divide mass by volume.
Real blocks are rarely perfect, so each dimension should be measured in two or three places and averaged, and the effect of a one-millimetre error on a small block discussed. A block that is too irregular for a ruler can have its volume found by displacement instead, using a clear overflow can and a measuring cylinder.
Blocks of the same material in different sizes or thicknesses give the same density even though their masses differ greatly, which tackles the common belief that heavier means denser. The density cube set of 10 takes the opposite approach, keeping the size fixed and changing the material.
Applications
- Calculating density from three measured dimensions and the mass
- Comparing a calculated volume with one found by water displacement
- Showing that density does not depend on size, using two pieces of one material
- Predicting floating and sinking in water, then checking by experiment
Specifications
| Item | Density blocks for measuring and calculating density |
| Used for | Mass, dimensions and float-or-sink comparisons |
| Measuring tools needed | Ruler or vernier calipers, balance, container of water |
| Listing image | Illustrative; shows wood and metal cubes and plates |
Care & Handling
- Measure each dimension of the density blocks at two or three points and average the results, especially on wood.
- Dry blocks after water tests, because wet wood gains mass and may swell.
- Zero the balance before each weighing and keep blocks off the pan between measurements.
- Store the blocks in a labelled box so each material can be identified in later lessons.
Why Choose LabEquip
Teachers who build density lessons around measurement skills, rather than simply comparing weights, buy density blocks for their classes. LabEquip lists them in its chemistry lab equipment; send the materials and sizes you want through the contact page.
Related Products
- Density Cube Set of 10: Ten cubes of equal size in different materials, so mass alone ranks their densities.
- Equal Volume Metal Cylinders, Set of 4: Four equal-volume metal cylinders for comparing mass, density and upthrust with regular shapes.
- Overflow Can and Bucket Set: An overflow can and catch bucket for finding the volume of irregular blocks by displacement.
- Metal Cubes: Solid metal cubes whose edge length and mass give density for identifying the metal.
- Density Determination Kit for Solid and Liquid Samples: A balance attachment that finds density by weighing a sample in air and then in liquid.
Frequently Asked Questions
How do students find the density of a block?
Measure the length, width and height of the block, multiply them to get the volume, weigh the block on a balance and divide the mass by the volume. Measuring each dimension in two or three places and averaging gives a better volume. The answer in grams per cubic centimetre can then be compared with values for the material in a data table.
Does cutting a density block in half change its density?
No. Halving the block halves both its mass and its volume, so their ratio, the density, stays the same. Density is a property of the material, not of the size of the object. Students can show this by measuring two blocks of the same material but different sizes and finding that they give nearly the same density.
How do you find the volume of a block that is not a neat shape?
Use displacement. Lower the block into an overflow can filled to its spout and collect the water that runs out, or lower it into a measuring cylinder of water and read the rise. The volume of water displaced equals the volume of the block. A block that floats has to be pushed just under the surface with a thin rod.
Why do wooden blocks give different density results?
Wood is a natural material, so its density changes with the species, the grain, knots and how much moisture the block holds. Two wooden blocks of the same size can differ noticeably in mass, and the same block can change slightly with humidity. That variation is a useful discussion point when results from different groups do not agree.
How can density predict whether a block will float in water?
Water has a density of about 1 g/cm³. A block with a lower density floats, and one with a higher density sinks. Students can predict the result from their calculated density before testing it in a tank, and for blocks that float, see how the fraction below the waterline is roughly the block’s density divided by the density of water.
Which measuring tools give the most accurate density result?
A vernier caliper measures small dimensions far more precisely than a ruler, and a balance reading to 0.01 g suits small blocks. On a small block an error of one millimetre in one side is a large percentage of the volume, so the measuring tool matters most for the smallest blocks; students can calculate the percentage error to see why.
Last Updated: November 2026










Reviews
There are no reviews yet.