Search

In Stock

Solar Furnace

₹1,458.00

Quick Answer: The Solar Furnace is a demonstration apparatus that uses a concave mirror to focus sunlight onto a small target. The listing photograph shows a round, curved mirror on a stand with a rod holding a small holder at its focus, used to show how concentrated solar energy can heat, char and melt materials.

Concentrating Sunlight at a Point

Sunlight arrives as almost parallel rays. A concave mirror reflects those rays inwards so that they meet near a single point, the focus. All the energy that falls on the face of the mirror is squeezed into a spot a fraction of its size, and the temperature at that spot rises sharply. A small object held at the focus can blacken paper, melt wax or chocolate, or heat a small quantity of water in a blackened container much faster than sunlight alone could.

The same principle scales up to industrial size. The large furnace at Odeillo in the French Pyrenees uses a field of flat mirrors and a huge curved mirror to focus sunlight onto a small target for high-temperature research, and concentrated solar power stations use curved mirrors to heat a fluid that drives turbines. The classroom apparatus lets students see the principle directly and measure it: comparing heating with and without the mirror, or with part of the mirror covered, shows that the effect depends on the collecting area.

The apparatus needs direct sunlight; a lamp gives only a weak effect because its rays are not parallel.

Safety and Care

  • Never look at the bright focal spot or at the Sun’s reflection in the mirror; use dark eye protection and look at the target from the side.
  • Keep hands, hair, clothing and anything flammable away from the focus, and do not leave the apparatus facing the Sun unattended.
  • Clean the mirror with a soft, damp cloth only, and cover it when stored so the reflecting surface is not scratched.

Applications

  • Showing how a concave mirror focuses parallel light
  • Measuring temperature rise at the focus compared with open sunlight
  • Renewable-energy lessons on concentrated solar power
  • Investigating how collecting area affects heating by masking part of the mirror

Specifications

Item Concave-mirror solar furnace for demonstrations
Form Curved mirror on a stand with a holder at the focus (listing photograph)
Energy source Direct sunlight
Demonstrates Reflection, focus, concentration of solar energy

Why Choose LabEquip

Schools usually buy a solar furnace for renewable-energy and optics lessons taught on sunny days outdoors. LabEquip lists it in Biology Lab Products and offers further kits in the solar energy kits range; the Radiation Can Kit covers absorption of radiant heat. Confirm size and holder design through the LabEquip contact page.

Related Products

  • Solar Cell: A photovoltaic solar cell for comparing light-to-electricity conversion with the furnace’s light-to-heat.
  • Solar Power Educational Kit: A solar power teaching kit for following up heat from sunlight with electricity from sunlight.
  • Mini Solar Kit: A mini solar kit with a photovoltaic cell that runs a small load directly from light.

Frequently Asked Questions

How does a solar furnace concentrate sunlight?

Sunlight arrives as nearly parallel rays. The concave mirror reflects them inwards so they meet near one point, the focus, where a small holder sits. All the energy falling on the mirror face is squeezed into a small spot, so the target there becomes far hotter than anything left in ordinary sunlight.

How do I aim a solar furnace at the sun?

Turn and tilt the mirror until it faces the sun squarely: the shadow of the holder and its rod falls on the centre of the mirror when it is lined up. Then adjust gently until the bright spot lands on the target. Never look at the sun or into the mirror while aiming.

What experiments can students do with a solar furnace?

Students can char paper or wood, melt wax or chocolate, heat a small amount of water, and compare how quickly black and white targets warm up. These show reflection, focus and the concentration of solar energy, and lead into how large solar furnaces and solar power plants work.

Does a solar furnace work on a cloudy day or with a lamp?

It needs direct sunlight. Cloud scatters the light so the rays are no longer parallel and the mirror cannot bring them to a sharp focus. A lamp gives some effect, but its rays spread out from a nearby point, so the focus moves away from the holder and is much weaker.

How is a solar furnace different from a solar cell?

A solar furnace turns sunlight into heat by concentrating it with a mirror. A solar cell turns light directly into electricity using a semiconductor junction. Using both in one lesson shows two different ways of harvesting energy from the sun.

What safety precautions apply when using a solar furnace?

Never look into the mirror or at the focus, and keep hands, faces and hair out of the beam, which can burn skin and ignite paper or clothing. Use tongs to handle hot targets, keep the area clear of flammable material, and cover or turn the mirror away from the sun when it is not in use.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)