Search

In Stock

Experiment Semiconductor Thermogenerator

TP Thermo-générateur à semi-conducteurs Utilizes industrial-grade bismuth-telluride semiconductors optimized for maximum thermal-to-electric conversion efficiency and high-sensitivity thermal response times.

Integrated Dual-Circuit Thermal Management Features ruggedized, factory-calibrated heat sinks and water-cooling blocks to maintain precise temperature differentials during high-current thermoelectric testing and analysis.

₹65,640.00

Quick Answer: The semiconductor thermogenerator experiment uses a module of semiconductor thermocouples to turn a temperature difference directly into electrical energy. Students measure the voltage produced against the temperature difference, the module’s internal resistance and the efficiency of the conversion.

The Seebeck Effect in Semiconductors

When the two junctions of a thermocouple are held at different temperatures, a voltage appears: the Seebeck effect. In metals the effect is small, but in suitably doped semiconductors it is much larger. A thermogenerator module connects many pairs of n-type and p-type semiconductor elements electrically in series and thermally in parallel, sandwiched between a hot face and a cold face, so their voltages add.

In the n-type elements electrons diffuse from the hot side to the cold side, and in the p-type elements holes do the same. Because the carriers have opposite charge, the two kinds of element produce voltages in the same sense when connected alternately, which is why the module uses both.

Measurements in the Practical

With one side heated, for example by warm water, and the other kept cool, the open-circuit voltage is measured for a series of temperature differences. The voltage is close to proportional to the difference, and the gradient gives the Seebeck coefficient of the module. Connecting a range of load resistors and measuring current and voltage gives the internal resistance and shows that maximum power is delivered when the load matches it.

Measuring the heat flowing through the module, from the rate at which the hot side cools or the cold water warms, allows the efficiency to be estimated and compared with the Carnot limit for the same temperatures. Driving a current through the module in the reverse direction shows the opposite process, the Peltier effect, in which one face cools and the other heats.

Topics Covered

  • Measuring the Seebeck coefficient of a thermoelectric module
  • Finding internal resistance and the condition for maximum power transfer
  • Estimating conversion efficiency and comparing it with the Carnot limit
  • Demonstrating Peltier cooling as the reverse effect

Specifications

Experiment Semiconductor thermogenerator (thermoelectric conversion)
Principle Seebeck effect in series-connected n- and p-type elements
Measurements Open-circuit voltage, internal resistance, power, efficiency
Related effect Peltier cooling and heating with a driven current
Module, heat sources, meters and load resistors supplied Confirm at enquiry

Care & Handling

  • Do not heat the module beyond the temperature stated for it, as overheating damages the joints between elements
  • Use heat-conducting paste where the module meets the hot and cold faces, and press evenly so the ceramic plates do not crack
  • Keep water away from the electrical connections when using water baths
  • Allow the module to return to room temperature before dismantling the setup

Why Choose LabEquip

Physics and engineering departments use the semiconductor thermogenerator to teach energy conversion with real efficiency figures rather than idealised ones. A simpler classroom alternative is the thermocouple electricity generator; contact LabEquip for the full component list, or browse more physics lab equipment.

Frequently Asked Questions

How does a thermogenerator produce electricity without moving parts?

A temperature difference across semiconductor elements makes charge carriers diffuse from the hot side to the cold side. This sets up a voltage, the Seebeck effect, which can drive a current through an external load.

Why are both n-type and p-type elements used?

Electrons in n-type material and holes in p-type material both move from hot to cold, but they carry opposite charges. Connecting the two types alternately makes their voltages add instead of cancelling.

When does the module deliver maximum power?

When the load resistance equals the module’s internal resistance. Measuring power for several load resistors and plotting it shows a peak at that matching value.

Why is the efficiency so low?

Much of the heat simply conducts through the elements without being converted. Even an ideal device could not exceed the Carnot efficiency for the same hot and cold temperatures, which is small for modest temperature differences.

What is the Peltier effect?

It is the reverse of the Seebeck effect. Driving a current through the module carries heat from one face to the other, so one side cools and the other warms, which is how thermoelectric coolers work.

Where are thermogenerators used in practice?

In space probes powered by radioactive heat sources, in remote sensors that run from waste heat, and in some portable stoves that charge small devices. They are chosen where reliability matters more than efficiency.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)