Quick Answer: The OptiMéca 600 x 400 mm metal panel is a rewritable steel working surface, written on with dry-wipe markers, to which magnetic laboratory components cling. The 600 x 400 mm metal panel holds magnetic pulleys, supports, force meters and optical components in a vertical plane, so experiments can be built, drawn on and wiped clean.
A Vertical Bench for Mechanics
Statics experiments work naturally on the OptiMéca panel because gravity acts along its surface. Hanging masses, strings over magnetic pulleys and force meters all lie in one plane, and students can draw the lines of action, angles and force vectors directly on the panel beside the apparatus. When the results have been recorded, the drawing is wiped off and the next group starts afresh.
Magnetic mechanics lab equipment, such as pulleys, supports, rulers and moments discs, can be moved in seconds, so one panel serves several different practicals in a lesson. Standing the panel upright also frees bench space and lets a whole class see a demonstration.
Optics on the Same Surface
The same panel suits optics experiment kits for schools that use magnetic ray boxes, mirrors, lenses and blocks. With the panel upright or laid flat, students trace rays straight onto the surface, mark the normal and measure angles of incidence and refraction with a protractor, then wipe the panel for the next arrangement.
At 600 x 400 mm, the panel is large enough for a three-force arrangement or a lens and its image distance, and small enough to sit on a bench or be carried between rooms.
Specifications
| Product | Rewritable (dry-erase) metal panel |
| Size | 600 x 400 mm, as titled |
| Surface | Steel, accepts magnetic components and dry-wipe markers |
| Uses | Board-based mechanics and optics experiments |
| Stand or wall-mounting arrangement | Confirm at enquiry |
Applications
- Force equilibrium and moments experiments with magnetic components
- Hooke’s law with springs hung from magnetic supports
- Ray tracing for reflection and refraction with magnetic optical parts
- Teacher demonstrations visible to the whole class
Care & Handling
- Use only dry-wipe markers; permanent markers stain the writing surface
- Clean with a dry eraser, then occasionally with a damp cloth and mild detergent
- Slide magnetic parts on and off rather than dragging them, to avoid scratches
- Store upright or flat with nothing sharp resting on the surface
Why Choose LabEquip
Schools and colleges set up the 600 x 400 mm panel as a shared base for board mechanics and optics, building up components over time. LabEquip supplies the magnetic pulley and magnetic graduated ruler that work on it, along with other physics lab equipment; contact LabEquip to plan a panel set.
Frequently Asked Questions
What does rewritable mean on this panel?
The surface can be written on with dry-wipe markers and wiped clean, like a whiteboard. Students draw force lines or ray paths directly beside the apparatus and erase them afterwards.
Which components can be attached?
Any component with a magnetic base, such as pulleys, supports, force meters, rulers, moments discs and magnetic optical parts. The steel surface holds them in any position.
Why work on a vertical panel rather than a bench?
Gravity acts along the panel, so hanging masses and strings stay in one plane, and the whole class can see the arrangement. It also frees bench space.
Can optics experiments be done on it?
Yes, with optical components on magnetic bases. Rays from a magnetic ray box can be traced straight onto the surface and angles measured with a protractor.
How should the panel be cleaned?
Wipe drawings off with a dry eraser after each use. Occasionally clean with a damp cloth and mild detergent, and avoid abrasive pads that scratch the coating.
How is the panel stood up or mounted?
The stand or mounting arrangement supplied with the panel can be confirmed at enquiry. It can be used upright for mechanics or laid flat on a bench for ray tracing.
Last Updated: October 2026










Reviews
There are no reviews yet.