Search

In Stock

U Shaped Electrolyzer with Carbon Electrodes

Electrolyseur en U à électrodes charbon Engineered with a specialized 180-degree bend radius to facilitate the distinct isolation of ionic migration, preventing the cross-contamination of evolved gases or precipitates during high-amperage cycles.

High-Density Synthetic Graphite Rods utilize ultra-pure carbon electrodes with optimized surface porosity to maximize current density and electrical conductivity while minimizing mechanical degradation during prolonged electrolytic reactions.

₹3,420.00

Quick Answer: This U-tube electrolysis apparatus is a glass U-tube held upright on a stand, with a carbon electrode passing through a stopper into the top of each limb and side outlets, as pictured. The U shape keeps the products formed at the anode and the cathode apart, so each can be seen, tested or collected separately.

Why a U-Tube

In a beaker, the substances formed at the two electrodes soon mix and may react with each other. In a U-tube the solution between the electrodes has to pass round the bend, so mixing is slow and each limb collects its own products. Colour changes stay where they started, and gases rise to the top of their own limb, where the side outlets let them be drawn off or tested.

Carbon (graphite) electrodes are used because they conduct well and do not dissolve in most school electrolytes. They also withstand chlorine, which would attack most metals, so the apparatus suits the electrolysis of chloride solutions.

Classic Electrolyses in the U-Tube

With potassium iodide solution and a few drops of phenolphthalein, a brown colour of iodine appears in the anode limb while the cathode limb turns pink as hydroxide ions form alongside hydrogen. With sodium chloride solution, chlorine forms at the anode, shown by damp blue litmus paper turning red and then white at the outlet, while hydrogen and sodium hydroxide form at the cathode. With copper(II) chloride, a pink coating of copper grows on the cathode.

Specifications

Product U-tube electrolysis apparatus with carbon electrodes
Shown in photograph Glass U-tube on a wooden stand, electrodes in stoppers with red and black terminals, side outlets
Electrodes Carbon (graphite), as titled
Power Low-voltage DC laboratory supply
Suits Aqueous solutions such as iodides, chlorides and copper(II) salts
Tube size and outlet fittings Confirm at enquiry

Electrolysis Investigations

  • Electrolysing potassium iodide to show iodine at the anode and alkali at the cathode
  • Electrolysing brine and identifying chlorine and hydrogen in separate limbs
  • Depositing copper from copper(II) chloride solution on the cathode
  • Watching coloured ions such as purple manganate(VII) drift towards the anode

Care & Handling

  • Run chloride electrolyses only briefly, in small volumes and with good ventilation, since chlorine is toxic
  • Use a low-voltage DC supply and switch off before removing the electrodes
  • Rinse the U-tube and electrodes with water after each run and let them dry
  • Stand the apparatus on a level bench and keep leads clear so the glass is not pulled over

Why Choose LabEquip

Teachers choose a U-tube when they want students to see that different products form at each electrode rather than a mixture. LabEquip supplies it with graphite electrodes in a stopper and other physics lab equipment; contact LabEquip to confirm the fittings.

Frequently Asked Questions

Why does the U shape matter?

It keeps the products at the two electrodes apart, so colours, gases and new substances stay in their own limb instead of mixing in the middle.

Why are carbon electrodes used?

Carbon conducts well, does not dissolve in most school electrolytes and is not attacked by chlorine, so the electrodes do not interfere with the products.

What forms when brine is electrolysed?

Chlorine forms at the anode and hydrogen at the cathode, leaving sodium hydroxide in the solution around the cathode.

How is chlorine identified?

Hold damp blue litmus paper at the anode outlet. Chlorine turns it red and then bleaches it white.

Why does the cathode limb turn pink with phenolphthalein?

Water is reduced at the cathode, giving hydrogen gas and hydroxide ions. The hydroxide ions make the solution alkaline, which turns phenolphthalein pink.

Do carbon electrodes wear away?

Slowly, when oxygen forms at a carbon anode, because the carbon reacts to form carbon dioxide. They can be replaced when they become thin or crumbly.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)