Quick Answer: An ABS microcentrifuge tube rack is a bench rack moulded from ABS (acrylonitrile butadiene styrene) plastic, with holes that hold microcentrifuge tubes upright. ABS makes the rack stiff and resistant to knocks, which suits everyday pipetting, but it is generally not autoclavable.
What ABS Brings to a Tube Rack
ABS is the tough, glossy plastic used for instrument housings and toy building bricks. In a rack it gives straight, rigid walls that do not flex as tubes are pushed in, crisp moulded markings and a smooth surface that wipes clean. It also stands up to dilute acids, alkalis and salt solutions, which covers most spills on a molecular biology bench.
Its limits are heat and certain solvents. ABS softens at temperatures well below those in an autoclave, so this rack is disinfected with ethanol or a mild disinfectant instead. Acetone, esters, ketones and chlorinated solvents can craze or dissolve it, so keep it away from direct spills during phenol-chloroform extraction.
Labs that must autoclave their racks usually choose polypropylene; the general rack for micro centrifuge tubes page describes the other formats. Where autoclaving is not part of the routine, ABS racks keep their shape and markings well through daily use.
Cleaning an ABS Rack
- Disinfect with 70 percent ethanol or a quaternary ammonium wipe.
- Keep acetone, chloroform and other solvents that attack ABS well away.
- Never put the rack in an autoclave, hot-air oven or on a hot plate.
- Store out of direct sunlight, which can fade and embrittle ABS over time.
Specifications
| Material | ABS (acrylonitrile butadiene styrene), per title |
| Holds | Microcentrifuge tubes |
| Rigidity | Stiff, impact-resistant plastic (general ABS property) |
| Heat | Generally not autoclavable; disinfect chemically |
Applications
- Daily pipetting stations in molecular biology labs
- Sample sorting in clinical biochemistry teaching labs
- Organising reagent aliquots on the bench during kit-based assays
- Holding tubes while samples are prepared for gel electrophoresis
Why Choose LabEquip
Labs that want a stiff, easily wiped rack for routine bench work, and have no need to autoclave it, choose ABS. LabEquip lists it in the Biology Lab Products range; send tube size and quantity through the contact page.
Related Products
- Rack for Micro Centrifuge Tubes: A general plastic microtube rack for the same pipetting work in a different material.
- Centrifuge Tube, Micro, Plastic: Plastic microcentrifuge tubes that sit in the rack’s holes.
- Box for Micro Centrifuge Tubes: A lidded microtube box for cold storage, since the bench rack is not made for the freezer.
- MCT Twin Rack: A two-sided MCT twin rack holding 0.5 ml tubes on one face and larger microtubes on the other.
Frequently Asked Questions
What is an ABS microcentrifuge tube rack?
It is a bench rack moulded from ABS (acrylonitrile butadiene styrene) plastic, with holes that hold microcentrifuge tubes upright. ABS gives the rack stiff, impact-resistant walls that do not flex as tubes are pushed in, which suits everyday pipetting and sample sorting.
Can an ABS tube rack be autoclaved?
Generally no. ABS softens at temperatures well below those in an autoclave, so the rack can warp and the holes lose their shape. Clean it instead with detergent and water, and disinfect with a suitable chemical wipe such as dilute bleach followed by a water rinse.
How does an ABS rack compare with a polypropylene rack?
ABS is stiffer, tougher against knocks and takes crisp moulded markings, but it cannot be autoclaved and is attacked by some solvents. Polypropylene is slightly flexible, resists more chemicals and can usually be autoclaved. Choose ABS for general bench work and polypropylene where heat sterilisation is needed.
Which chemicals can damage an ABS tube rack?
ABS resists dilute acids, alkalis and salt solutions, which covers most spills on a molecular biology bench. Solvents such as acetone, chloroform and some aromatic compounds can soften, craze or dissolve it. Wipe up solvent spills straight away and keep solvent extractions in racks made of a more resistant plastic.
Is an ABS rack suitable for DNA and RNA work?
Yes, as a bench rack for holding tubes. For RNA work, keep a rack set aside only for that purpose and wipe it with a solution that removes RNA-degrading enzymes before use, because the rack cannot be autoclaved. Clean tubes, filter tips and gloves matter more than the rack material.
Why is a rigid rack useful when pushing caps closed?
Microtube caps often need a firm press to snap shut. A stiff ABS rack holds the tube still and does not bend under the pressure, so the cap closes evenly without the tube tipping or the rack flexing. This makes closing a row of tubes quicker and reduces the chance of leaks in the centrifuge.
Last Updated: November 2026










Reviews
There are no reviews yet.