Search

In Stock

Carboy With Stop Cock, Plastic

High-Density Polypropylene Architecture: Fabricated from medical-grade, chemically inert polymer, providing superior resistance to aggressive solvents and high-impact durability for long-term hazardous fluid containment.

Integrated Leak-Proof Stopcock: Features a precision-engineered, threaded dispensing tap with a reinforced seal mechanism, ensuring drip-free volumetric discharge and maintaining the atmospheric integrity of stored bulk liquids.

₹750.00

Quick Answer: A plastic carboy with stopcock is a large, handled storage container with a tap fitted near its base, used to hold distilled water, buffers or stock solutions and dispense them by gravity. The tap removes the need to lift and tip a heavy, full vessel.

How a Tap-Fitted Carboy Changes the Bench Routine

A full carboy is heavy, and pouring from one means lifting it, tilting it and hoping the stream lands in the neck of a small bottle. Fitting a stopcock low on the body turns the carboy into a reservoir that stays put on a shelf or bench edge. Students fill beakers and measuring cylinders by opening the tap, and the bulk liquid is never disturbed or contaminated by pipettes and funnels dipped into it.

Polypropylene containers are generally autoclavable at 121 °C and high-density polyethylene ones generally are not, which matters if the carboy will hold sterilised water. Either plastic copes well with dilute acids, alkalis and aqueous salt solutions.

A carboy without a tap, such as the plain plastic carboy in the Lab Glassware range, suits long-term storage and transport; this version suits daily dispensing. Loosen the top cap slightly while the tap is running, otherwise air cannot replace the outflowing liquid and the flow slows to a glug.

Applications

  • Holding the day’s supply of distilled or deionised water in a teaching lab, so that wash bottles are refilled straight from the tap
  • Storing prepared buffer or dilute stock solutions, such as physiological saline for biology practicals
  • Collecting water from a still or deionisation unit and dispensing it where it is needed
  • Supplying one reagent, for example limewater, to a whole class without repeated pouring from a large bottle

Specifications

Item Carboy with stopcock (tap) near the base for dispensing
Material Plastic, as titled; the listing photo shows polypropylene
Handles Moulded carrying handles, as seen in the listing photo
Dispensing Gravity flow through the stopcock, with the cap vented

Care & Handling

  • Stand the carboy with the stopcock overhanging the shelf edge or on a raised block, so a beaker or bottle fits beneath the tap.
  • Check the stopcock for drips after the first filling and before leaving the carboy unattended overnight.
  • Clean with dilute laboratory detergent and rinse well; for distilled water, a periodic drain and rinse limits algal or bacterial film on the walls.
  • Keep organic solvents out of the carboy until both the resin and the stopcock seals have been checked against the solvent.

Why Choose LabEquip

Lab technicians and school science departments buy carboys like this to keep a bulk supply of water or reagent in one place. LabEquip lists it with other chemistry lab equipment; to confirm capacity and material for your storage needs, write through the contact page.

Related Products

Frequently Asked Questions

What is a carboy with stopcock used for?

It is a large, handled plastic container with a tap near its base, used to store distilled water, buffers or stock solutions and dispense them by gravity. The tap removes the need to lift and tip a heavy full container.

Why must the cap be loosened when dispensing from a carboy?

As liquid flows out, air must enter to replace it. With a tight cap, a partial vacuum forms inside, the flow slows to a trickle or stops and the walls may draw in. Loosening the cap or using a vented cap lets the liquid run smoothly.

What liquids can be stored in a polypropylene carboy?

Polypropylene, the material shown in the listing photo, suits water, most aqueous salt solutions, dilute acids and alkalis. Check compatibility before storing organic solvents or strong oxidisers, and label the carboy with its contents and date.

Where should a carboy with tap be placed?

Put it on a sturdy shelf or bench edge high enough for beakers and bottles to fit under the tap, and away from heat and direct sunlight. A full carboy is heavy, so position it before filling and lift it by its moulded handles.

How do you clean a plastic carboy with stopcock?

Empty it, rinse several times with warm water and a mild laboratory detergent, flush water through the tap, then rinse with distilled water. Remove and clean the tap if residue builds up, and dry with the cap off.

How do you prevent contamination of distilled water in a carboy?

Dispense only through the tap, never dip pipettes or beakers into the carboy, and keep the opening covered. Empty and clean it regularly so algae or dust do not build up.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)