Search

In Stock

Table Top Scale

High-Resolution Strain Gauge Matrix: Engineered with compensated sensor technology to maintain linear accuracy and minimize sensitivity drift during intensive, high-frequency weighing cycles across various load capacities.

Hybrid Power Architecture: Features an integrated uninterruptible power system with a long-life rechargeable battery and AC compatibility, ensuring continuous operational uptime for field calibration and warehouse logistics.

₹1,235.00

Quick Answer: A table top scale is a compact bench scale, normally electronic, with a weighing pan or small platform on top of a load cell and a display at the front, used to weigh parcels, materials, food and samples on a counter or workbench. It is a general-purpose weighing tool for stores, kitchens, workshops and laboratories.

Where a Table Top Scale Fits

Bench scales sit between small precision balances and floor-standing platform scales. They take larger loads than a laboratory precision balance but read in coarser steps, and they are small enough to stand on a counter. That suits them to weighing parcels before dispatch, ingredients in a kitchen, components in a workshop, or bulk samples in a laboratory where fine resolution is not needed.

In an electronic bench model a single-point load cell under the pan bends slightly under the load. Single-point cells are designed so that the reading is nearly the same wherever the load sits on the pan, which suits the uneven shapes of parcels and goods.

Setting Up and Checking

Stand the scale on a solid, level surface and adjust its feet until the level bubble, if fitted, is centred. Switch on with nothing on the pan, let it settle, and use the zero or tare key before each weighing. Check it periodically with a known weight close to the loads you usually weigh, and recalibrate following the manual if it reads outside the tolerance you need.

Applications

  • Weighing parcels and cartons for dispatch
  • Portioning ingredients in canteens and food laboratories
  • Weighing components and materials in workshops and stores
  • Weighing bulk samples, soils or feeds in agricultural and science labs

Specifications

Type Bench (table top) scale
Sensing Load cell under the pan, in electronic models
Placement Counter or workbench
Typical users Stores, kitchens, workshops, laboratories
Capacity, readability, pan size and power Confirm at enquiry

Care & Handling

  • Keep loads within the capacity; overloading can permanently damage the load cell.
  • Place items on the pan instead of dropping them.
  • Clean the pan with a damp cloth and keep liquids out of the housing.
  • Keep the scale away from strong draughts, fans and vibrating machines.

Why Choose LabEquip

Stores, canteens, workshops and laboratories buy table top scales for everyday weighing above the range of a laboratory balance. LabEquip lists it in Physics Equipments; if labels with the weight are also needed, see the label printing scale, and send capacity needs through our contact page.

Frequently Asked Questions

What is the difference between a table top scale and a precision balance?

A precision balance reads in much finer steps but takes smaller loads. The bench scale handles heavier items with coarser readings, which is enough for parcels, food and materials.

Why does the scale need to be level?

A tilted load cell senses only part of the load and can read wrongly. Levelling the feet ensures the full weight acts on the load cell in the direction it was calibrated.

What does the tare key do?

It sets the display to zero with a container on the pan, so the scale shows only the contents added afterwards.

Does it matter where the item is placed on the pan?

Single-point load cells are designed to give nearly the same reading anywhere on the pan, but placing items centrally is still good practice, especially for heavy loads.

How do I know if the scale needs recalibration?

Weigh a known test weight; if the reading differs by more than you can accept, recalibrate following the manual or have the scale serviced.

Can a table top scale be used for trade?

Scales used for selling by weight generally need verification under local legal metrology rules. Check the requirements in your area and confirm the model’s approval status at enquiry.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)