Quick Answer: The Spring (Newton) Balance, Push Pull Type (Dynamometer) is a spring force meter that measures both pulling (tension) and pushing (compression) forces along its axis. The push pull dynamometer is used in school mechanics to apply and read forces on trolleys, blocks and springs in either direction, and to show that paired forces are equal and opposite.
Push as Well as Pull
An ordinary hanging spring balance measures only tension: the load stretches the spring. A push-pull type adds the ability to measure compression, so a student can press the meter against a trolley, a block or a spring and read the push directly. Instruments of this type usually have a hook for pulling and a pushing end, and the scale is read for whichever direction is applied.
The word dynamometer simply means force meter. Engineers also use it for machines that measure the torque and power of engines, but in a physics laboratory it describes a spring instrument like this one.
Specifications
| Type | Spring (newton) balance, push-pull dynamometer |
| Measures | Tension (pull) and compression (push), along the axis |
| Units | Newtons |
| Suited to | Trolley dynamics, spring compression, Newton’s third law |
| Range and fittings | Confirm at enquiry |
Newton’s Third Law and Trolley Experiments
Hook two push pull dynamometers together and have two students pull on opposite ends. Whatever the effort, both read the same value, a direct demonstration that the forces two bodies exert on each other are equal and opposite. Pushing end to end gives the same result in compression.
Push mode is used to start or stop a Fletcher trolley or dynamics trolley with a measured force, to measure the force needed to compress a spring, and to compare pushing and pulling a loaded box. Because pushing downward at an angle adds to the force pressing the box on the floor, comparing a push and a pull at the same angle makes a good friction investigation.
Applications
- Newton’s third law: two meters pulling or pushing against each other read equal and opposite forces
- Applying measured pushes and pulls to trolleys in Newton’s second law work
- Measuring the force needed to compress springs, foam or other soft materials
- Comparing pushing and pulling a load at an angle and the effect on friction
Care & Handling
- Push only along the axis of the push pull dynamometer; a sideways push bends the pushing end and makes the reading drag.
- Keep pushes within the scale; forcing the mechanism to its stop can damage the spring.
- Wipe the hook and pushing end after use and store the meter with no load on it.
- Check that the indicator returns to zero after each push and each pull.
Why Choose LabEquip
Teachers buy push-pull dynamometers when practicals involve pushes as well as pulls, typically in pairs so that each group can run the third-law demonstration. LabEquip lists this meter in its physics lab equipment range. For quantities and force ranges, write to us via the contact page.
Frequently Asked Questions
How does a push pull dynamometer differ from an ordinary spring balance?
An ordinary spring balance measures only pulling forces, because its spring is designed to be stretched. A push pull type also measures pushing, or compressive, forces, so it can be pressed against an object as well as hooked to it.
How does the meter show Newton’s third law?
Link two meters hook to hook and pull them apart, or press them end to end. Both always read the same force in opposite directions, whichever student pushes or pulls harder, showing that action and reaction are equal and opposite.
Why is pushing a box harder than pulling it at the same angle?
When you push downward at an angle, part of your force presses the box onto the floor, which increases the normal force and so the friction. Pulling upward at an angle lifts slightly, reducing the normal force and the friction.
Can it measure the spring constant of another spring?
Yes. Press or pull the test spring with the dynamometer in steps and measure its change in length each time with a ruler. Force divided by change in length gives the spring constant, provided the spring stays within its elastic limit.
What does the word dynamometer mean?
It comes from Greek words for power and measure, and in physics it simply means a force meter. Engineers also use the word for machines that measure the torque and power output of engines and motors.
Should the meter be zeroed differently for pushing?
Check the zero with the meter held the way you will use it, because the weight of the moving parts acts along the spring when it is vertical. For horizontal pushes on a trolley, zero it while holding it horizontally.
Last Updated: October 2026










Reviews
There are no reviews yet.