Quick Answer: The Centrifuge Tube, Glass is a thick-walled glass tube that holds liquid samples while they are spun in a centrifuge. A glass centrifuge tube is chosen when the sample contains solvents that attack plastic or when tubes are to be washed and reused.
When to Choose Glass for Centrifugation
In a centrifuge, denser particles are driven to the bottom of the tube, forming a pellet, while the lighter liquid above, the supernatant, can be poured or pipetted off. Glass tubes are chosen over plastic for work with organic solvents such as chloroform, phenol, acetone and ether, which soften or dissolve many plastics. They can be washed, dried and sterilised repeatedly, and liquid levels and pellets are easy to see through the clear wall.
Glass has limits. It tolerates much lower centrifugal force than many plastic tubes, so it belongs in bench and clinical centrifuges at moderate speeds rather than high-speed rotors, and each tube’s rating should be known before use. Rubber cushions in the buckets help to spread the load. Tubes must be balanced in opposite positions, and any tube with a chip or crack should be discarded, because it can shatter under load.
A graduated glass centrifuge tube is listed separately for volume readings.
Specifications
| Item | Centrifuge tube, glass |
| Main advantage | Resists organic solvents; reusable after washing |
| Limitation | Lower g-force tolerance than many plastic tubes |
| Accessories | Rubber cushions or adapters for the centrifuge buckets |
Applications
- Preparing urine sediment for microscopy in a laboratory centrifuge during clinical pathology practicals
- Separating precipitates from solutions in chemistry and biochemistry
- Phenol-chloroform extraction and other solvent work in molecular biology
- Harvesting cells or microbes from broth cultures
Safe Centrifugation
- Inspect each glass centrifuge tube against the light for chips, scratches and star cracks before every run.
- Load tubes in opposite positions with equal volumes, and use cushions or adapters that fit the tube.
- Stay within the tube’s rated speed and let the rotor stop on its own before opening the lid.
- If a tube breaks, switch off, wait for the rotor to stop and clean the bucket with care, disinfecting it if the sample was biological.
Why Choose LabEquip
Clinical pathology labs, biochemistry teaching labs and chemistry departments keep glass centrifuge tubes for solvent work and for tests where tubes are reused. LabEquip lists them in Biology Lab Products; tell us the capacity and bottom shape you need through the contact page.
Related Products
- Graduated Glass Centrifuge Tube: A glass centrifuge tube with a conical base and graduation marks for reading the volume of sediment after spinning.
- Centrifuge Tube Conical Bottom: A conical bottom tube for pelleting cells and precipitates where resistance to organic solvents is not needed.
- Brush, Tubes/Vials: A slim brush for cleaning narrow tubes and vials whose openings are too small for an ordinary test tube brush.
- Centrifuge Tube, Round Bottom, Plastic: A plastic round bottom tube for mixing, resuspension and general spins as an unbreakable alternative.
Frequently Asked Questions
When should I use a glass centrifuge tube instead of a plastic one?
Choose glass when the sample contains organic solvents such as chloroform, phenol, acetone or ether, which soften or dissolve many plastics, or when tubes are to be washed and reused. Glass also gives a clear view of liquid levels and pellets. For high speeds, plastic tubes rated for the rotor are the safer choice.
Can glass centrifuge tubes be spun at high speed?
Glass tolerates much lower centrifugal force than many plastic tubes, so glass tubes belong in bench and clinical centrifuges at moderate speeds, not in high-speed centrifuges. Follow the centrifuge manual’s limit for glass, and inspect every tube for chips and cracks before it is loaded.
Why are rubber cushions used under glass centrifuge tubes?
A rubber cushion or adaptor in the bottom of the bucket spreads the load on the base of the glass tube and fills the gap between tube and bucket. Without it, the tube presses on a small point and is far more likely to break during the spin.
What should I do if a glass tube breaks inside the centrifuge?
Switch off and wait until the rotor has stopped completely, and keep the lid closed for a while if the sample could form aerosols. Wearing gloves, remove broken glass with forceps, never with fingers, then clean and disinfect the bucket, rotor and chamber as the lab’s spill procedure requires.
How are glass centrifuge tubes cleaned for reuse?
Rinse the tubes soon after use, then wash with laboratory detergent and a soft-bristled tube brush, avoiding scouring powder and abrasive pads that scratch the glass and weaken it. Rinse with tap water and then distilled water, dry, and check for scratches or chips before the next spin.
Why do centrifuge tubes have to be balanced?
A centrifuge spins fast, so even a small difference in mass between opposite positions creates a strong off-centre force that makes the machine vibrate and can damage the drive or break tubes. Opposite tubes must match in type and filled weight; with glass, using matching tubes from the same set helps.
Last Updated: November 2026










Reviews
There are no reviews yet.