Search

In Stock

Swan Neck For Use With Airleak Tube Adapters

Metrologically Controlled 180-Degree Curvature: Specially designed geometry that optimizes vapor path flow while providing a secure, vertical interface for air-leak tubes and capillary inlets.

CNC-Ground Standard Taper Interfaces: Features high-vacuum matte finish joints (Socket to Cone) manufactured to exact 1:10 taper ratios, ensuring hermetic sealing and universal interchangeability with modular glassware systems.

₹360.00

Quick Answer: A swan neck adapter for use with an air-leak tube is a glass fitting for vacuum distillation that holds a fine capillary tube reaching into the boiling flask. A slow stream of air or nitrogen bubbling from the capillary keeps the liquid boiling smoothly under reduced pressure.

Why Vacuum Distillation Needs an Air Leak

Liquids boiling under reduced pressure tend to superheat and then bump violently, and ordinary boiling chips stop working once their trapped air has been pumped out. The traditional remedy is an air-leak, or bleed, tube: a glass capillary drawn out to a very fine tip and lowered until the tip is close to the bottom of the boiling flask. Under vacuum a thin thread of tiny bubbles leaves the tip continuously, providing nucleation sites so the liquid boils evenly.

The swan neck adapter carries that capillary. Its lower end fits the flask or a neck of the distillation head, and its curved neck guides the capillary down into the liquid. The top of the capillary is usually fitted with a short length of pressure tubing and a screw clip to set the bleed rate, or joined to a nitrogen supply when the hot liquid must not meet air.

Magnetic stirring is the usual alternative in modern vacuum work, and many labs use both. The air leak remains useful where a stirrer bar cannot be used, or when a gas bleed is wanted.

Specifications

Type Swan neck adapter for an air-leak capillary
Use Vacuum distillation, anti-bumping bleed
Holds Glass capillary reaching into the boiling flask

Applications

  • Vacuum distillation of high-boiling liquids with a capillary bleed to prevent bumping
  • Introducing a slow nitrogen bleed to protect air-sensitive liquids under vacuum
  • Teaching the classic reduced-pressure distillation set-up in college practicals
  • Distillations where a stirrer bar cannot be used

Care & Handling

  • Use a capillary fine enough to give a thread of small bubbles, not a stream of large ones; too coarse a bleed spoils the vacuum.
  • Set the bleed with a screw clip on the tubing at the top of the capillary before applying heat.
  • Clear a blocked capillary by drawing solvent through it with gentle suction rather than pushing wire into it.
  • Inspect the adapter for cracks before every evacuation.

Why Choose LabEquip

Organic chemistry departments and research groups that still teach or rely on capillary-bleed vacuum distillation order swan neck adapters for their vacuum sets. LabEquip lists this fitting under chemistry lab equipments and offers the complete vacuum distillation assembly; confirm the joint size on the contact page.

Related Products

Frequently Asked Questions

What is an air-leak tube in vacuum distillation?

An air-leak, or bleed, tube is a glass capillary drawn out to a very fine tip that reaches almost to the bottom of the boiling flask. Under vacuum a thin, steady thread of bubbles leaves the tip, giving the liquid places to boil evenly. The swan neck adapter holds that capillary in position.

Why do boiling chips not work under vacuum?

Boiling chips work by releasing small pockets of trapped air that start bubbles. Under reduced pressure that air is pumped out quickly, so the chips stop working and the liquid can superheat and then bump violently. A capillary bleed or vigorous stirring replaces them.

How fine should the air-leak capillary be?

Fine enough that only a slow stream of tiny bubbles leaves the tip under vacuum. A common check is to blow gently through the capillary with its tip under a little acetone and look for a thin stream of very small bubbles.

How is the bleed rate of the air-leak tube adjusted?

A short length of pressure tubing on top of the capillary, fitted with a screw clip, controls how much air enters. Tightening the clip slows the bubble stream; loosening it speeds it up. Adjust it so boiling is smooth without spoiling the vacuum.

Can nitrogen be used through the air-leak tube instead of air?

Yes. When the compound being distilled reacts with oxygen or moisture, the capillary is connected to a gentle nitrogen supply so the bubbles are inert gas instead of air.

Is an air-leak tube needed if the flask is stirred magnetically?

Vigorous magnetic stirring also prevents bumping under vacuum and is often used instead in modern set-ups. The capillary bleed remains useful where stirring is not possible, such as with very viscous liquids or with heating methods that cannot drive a stirrer.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)