Quick Answer: A filter pump, also called a water aspirator or water-jet pump, is a small device fitted to a laboratory tap that uses a fast jet of water to draw air out through a side arm. It provides suction for vacuum filtration and other light vacuum work, with no motor or oil.
Suction from a Water Jet
Inside the pump, tap water is forced through a narrow nozzle and emerges as a fast jet into a slightly wider tube. The moving water drags air along with it and carries it away down the drain, while the pressure around the jet falls; this is the Venturi effect in practice. A side arm opening into that low-pressure region is connected by thick-walled tubing to a filtering flask, and air is drawn out of the flask for as long as the water runs.
The lowest pressure a water pump can reach is limited by the vapour pressure of the water itself, so suction improves with colder water and weakens on a warm day or with low tap pressure. That is ample for suction filtration and for drying crystals on a Buchner funnel, but not for work that needs a deep vacuum, such as many vacuum distillations.
Fitting a trap bottle between the pump and the flask is good practice in any case. For a complete assembly, see the vacuum filtration apparatus.
Specifications
| Item | Water-jet filter pump (aspirator) |
| Principle | Venturi effect: a fast water jet entrains air from a side arm |
| Power | Tap water pressure; no motor, electricity or oil |
| Connections | Tap end, side arm for vacuum tubing, outlet to drain |
Applications
- Suction filtration with a Buchner or Hirsch funnel in organic and inorganic practicals
- Drawing air through crystals on the filter to dry them before weighing
- Partially evacuating a vacuum desiccator for slow drying of samples
- Supplying vacuum to a rotary evaporator in teaching labs without a mechanical pump
Care & Handling
- Open the tap fully before connecting the flask, and break the vacuum at the flask before turning the water off.
- Place a trap bottle between pump and flask so back-flowing water cannot reach the filtrate.
- Use thick-walled vacuum tubing; ordinary thin rubber tubing collapses under suction.
- Flush or descale the nozzle if suction weakens, since hard-water deposits narrow the jet.
Why Choose LabEquip
Schools and colleges without a mechanical vacuum pump rely on water aspirators for every suction filtration, often one per bench tap. LabEquip includes this pump in its chemistry lab equipment range; send tap fitting details and quantities through the contact page.
Related Products
- Flask, Filtering: A heavy-walled side-arm filtering flask that the pump evacuates for suction filtration.
- Funnel, Buchner: A Buchner funnel with a flat perforated plate that sits in the filtering flask under suction.
- Vacuum Tube, Rubber: Heavy-walled rubber vacuum tubing that resists collapse between pump and flask.
- Aspirator: A plastic water aspirator for taps, a lighter alternative to this filter pump.
- Desiccator (Vacuum)-All Clear, Plastic: A plastic vacuum desiccator that a filter pump can evacuate for faster drying.
Frequently Asked Questions
How does a water filter pump create suction?
Tap water is forced through a narrow nozzle inside the pump and emerges as a fast jet into a slightly wider tube. The jet drags air along with it and carries it down the drain, lowering the pressure in the side arm, which is connected to the filter flask. This is the Venturi effect, and it needs no motor, electricity or oil.
How do you stop water sucking back into the filter flask?
Suck-back happens when the water pressure drops or the tap is turned off while the flask is still under vacuum. Fit a trap bottle between pump and flask, and at the end of the filtration disconnect the vacuum tubing from the flask, or open the vent, before turning off the tap. Some pumps also have a built-in non-return valve.
Why is the suction from a water filter pump weaker on some days?
The suction depends on how fast water flows through the jet, so low mains pressure, a partly opened tap or several pumps running from one supply all reduce it. Warmer water also limits the vacuum, because the lowest pressure a water pump can reach is roughly the vapour pressure of the water flowing through it.
What is the lowest pressure a water aspirator can reach?
A water aspirator cannot pull the pressure below the vapour pressure of the water flowing through it, which is about 2.3 kPa at 20 °C and rises with temperature. In practice school pumps reach somewhat higher pressures because of leaks and limited water flow. That is enough for filtration and many vacuum distillations.
What tubing should connect a filter pump to a filter flask?
Use heavy-walled vacuum tubing, whose wall is thick compared with its bore so it does not flatten when the air inside is pumped out. Ordinary thin rubber tubing collapses under suction and blocks the line. Push the tubing well onto the side arm and the pump’s barb, and keep the run short to avoid kinks.
Can a water filter pump be used for a vacuum desiccator?
Yes. A water filter pump gives enough vacuum to evacuate a desiccator for drying crystals and filter papers. Put a trap bottle in the line so water cannot be drawn back, close the desiccator stopcock before turning off the tap, and release the vacuum slowly afterwards so the samples are not disturbed.
Last Updated: November 2026










Reviews
There are no reviews yet.