Search

In Stock

Flask, Boiling, Short Neck with Interchangeable Joint

Precision-Ground Conical Joints: Engineered with a 1:10 taper to meet international "interchangeable" specifications, ensuring vacuum-tight seals and universal compatibility with modular condensers, funnels, and adapters.

Heavy-Wall Borosilicate 3.3 Construction: Fabricated with optimized wall thickness to provide superior mechanical strength and resistance to thermal gradients, specifically designed to withstand the rigors of reflux and evaporation cycles.

₹525.00

Quick Answer: A short neck boiling flask with interchangeable joint is a boiling flask whose short neck ends in a ground-glass standard taper socket. The joint lets condensers, still heads, adapters and stoppers with the matching cone fit directly, without rubber bungs.

What an Interchangeable Joint Changes

Older apparatus was joined with corks and rubber bungs, which scorch, swell in solvents and leak. Interchangeable ground joints replaced them: every socket and cone of a given size is ground to the same taper, so any flask can be connected to any condenser or adapter with the same joint size, making a close, solvent-resistant seal. A flask of this kind is the base of such an assembly.

The short neck keeps the assembly compact. It sits low in a heating mantle, brings the joint close to the flask body so vapour reaches the still head or condenser quickly, and reduces the height of a reflux or distillation stack on a retort stand. Long-neck flasks, by contrast, are chosen where the neck itself must stay cooler or keep a joint away from the heat.

Joint size is the specification that matters most, because a flask is of little use if its socket does not match the cones on the rest of the kit.

Care & Handling

  • Apply only a thin smear of joint grease to the upper part of the cone, or use a PTFE sleeve; grease inside the flask contaminates the product.
  • Secure each joint with a plastic joint clip so the flask cannot slide off the condenser.
  • Take joints apart soon after use; left assembled, especially with alkaline residues, they can seize.
  • Protect the ground surface from knocks and grit, which scratch it and cause leaks.

Specifications

Item Boiling flask with a short neck and ground-glass socket
Joint Interchangeable standard taper socket at the neck
Neck Short, for compact assemblies and heating mantles
Connects to Condensers, still heads, adapters and stoppers with matching cones

Applications

  • Reflux set-ups with a condenser fitted directly into the neck
  • Simple distillation with a still head and condenser
  • Organic preparations where cork or rubber would be attacked by solvents
  • Teaching assemblies in which students build apparatus from standard jointed parts

Why Choose LabEquip

College and university organic laboratories standardise on jointed glassware so that flasks, condensers and adapters all fit together. LabEquip lists this flask in its chemistry lab equipment range with jointed condensers such as the Graham condenser; send your joint size and capacities via the contact page.

Related Products

Frequently Asked Questions

What does an interchangeable joint on a boiling flask mean?

It means the flask neck ends in a ground-glass socket of standard taper, so any cone of the same size fits it, whatever piece it is on. A condenser, still head, adapter or stopper with the matching cone can be fitted directly, without rubber bungs, giving a close seal that resists solvents and heat.

How do you find the joint size of a ground-glass flask?

The size is usually printed or etched near the frosted joint, written as two numbers such as 24/29 or 19/26. The first is the wide-end diameter of the joint in millimetres and the second the ground length. Components must carry the same pair of numbers to fit, or an expansion or reduction adapter is needed between them.

Should ground-glass joints on a flask be greased?

For routine reflux and distillation, clean dry joints usually seal well and avoid grease contaminating the product. Grease them lightly, applying a thin band near the top of the cone, for vacuum work and when using hot alkali, which can fuse dry joints. PTFE sleeves are a grease-free alternative.

Why choose a short neck flask with a ground joint?

A short neck keeps the assembly compact and brings the joint close to the body of the flask, so the flask sits low in a heating mantle and the condenser or still head stands lower on the retort stand. That makes the apparatus steadier and easier to clamp, especially in a fume cupboard with limited height.

What should be done if a ground joint on a flask is stuck?

Do not force it. Let the apparatus cool, then twist gently while pulling. If it stays fixed, warm the outer socket briefly with warm water so it expands, and twist again with gloves on. Tapping the joint lightly with a wooden handle can help. Cleaning and lightly greasing joints after alkali work prevents most sticking.

Can a short neck jointed flask be heated in a heating mantle?

Yes. Its short neck lets most of the body sit inside the mantle, which heats evenly. Clamp the flask at the neck so the mantle does not carry the weight of the assembly above, keep the joint above the mantle so it does not overheat, and match the mantle size to the flask’s capacity.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)