Quick Answer: A narrow mouth reagent bottle is a laboratory storage bottle with a small neck opening, normally closed by a stopper, used to store liquid reagents and pour them in a controlled stream. The narrow neck limits evaporation and spillage compared with a wide-mouth bottle.
Why Liquids Go in Narrow-Necked Bottles
Liquids are poured, not scooped, so a liquid reagent does not need a wide opening. The narrow mouth reagent bottle takes advantage of that. Its small neck gives a thin, steerable stream when pouring into a beaker or measuring cylinder, and the small exposed surface means less evaporation of volatile liquids such as ethanol or dilute ammonia solution, and less moisture pick-up by hygroscopic liquids like concentrated sulfuric acid.
This listing does not name the bottle material or colour, and LabEquip lists a clear-glass version separately as the Reagent Bottle, Narrow Mouth (Clear Glass). Narrow-mouth reagent bottles are generally made in clear glass, in amber glass for light-sensitive solutions, or in plastics such as polyethylene and polypropylene, so state which you need when ordering.
The choice matters chemically. Amber glass protects silver nitrate and potassium permanganate solutions from light; plastic is required for hydrofluoric acid, which dissolves glass; and glass is preferred for most organic solvents. Many school reagent shelves are organised as one set of narrow-mouth bottles in mixed materials, each matched to its contents.
Applications
- Bench reagent sets for qualitative analysis, one bottle per test solution
- Storing dilute acids and alkalis for school practicals
- Keeping volatile liquids such as ethanol with little evaporation between lessons
- Holding light-sensitive solutions when an amber version is chosen
Specifications
| Item | Reagent bottle with a narrow neck for liquids |
| Neck | Narrow mouth for controlled pouring and reduced evaporation |
| Suited contents | Liquid reagents: dilute acids, alkalis, salt solutions, solvents |
| Related listing | Clear-glass version listed separately |
Care & Handling
- Keep glass stoppers out of bottles of sodium hydroxide or other alkalis; alkali creeps into the ground joint and cements the stopper. Use a rubber or plastic closure instead.
- Hold the bottle with the label towards your palm when pouring, so drips run down the unlabelled side.
- Set a removed stopper down on its flat top, never on its tapered side, so it does not pick up contamination from the bench.
- Never return unused reagent to the bottle; pour out only what you need.
Why Choose LabEquip
School and college chemistry departments buy narrow-mouth bottles in sets to stock reagent shelves and side-bench kits. LabEquip keeps them in the Chemistry Lab Equipments category alongside wide-mouth bottles for solids; send the material, colour and sizes required through the contact page.
Related Products
- Reagent Bottle, Narrow Mouth (Clear Glass): The clear glass narrow mouth version, for liquids whose colour and clarity should be visible on the shelf.
- Reagent Bottle (Narrow Mouth), Plastic: A plastic narrow mouth reagent bottle that does not shatter and suits sodium hydroxide solution.
- Reagent Bottles (Narrow Mouth) – Amber: An amber narrow mouth bottle for light-sensitive solutions such as silver nitrate and potassium iodide.
- Reagent Bottle, Wide Mouth: The wide mouth reagent bottle, made for powders and crystals rather than liquids.
- Wash Bottle: A wash bottle for rinsing with distilled water, kept beside the stock reagent bottles.
Frequently Asked Questions
What is a narrow mouth reagent bottle used for?
It stores liquid reagents such as dilute acids, alkalis, salt solutions and indicators and lets them be poured in a thin, controlled stream. The small neck exposes less liquid to the air, which slows evaporation of volatile liquids and moisture pick-up by hygroscopic ones.
What is the difference between narrow mouth and wide mouth reagent bottles?
Narrow mouth bottles are for liquids, which are poured; wide mouth bottles are for solids, which are scooped out with a spatula. Using the right one keeps pouring neat for liquids and lets solids be removed without tapping the bottle and spreading dust.
How do I choose between glass, plastic and amber reagent bottles?
Glass suits most acids and organic solvents and does not absorb odours. Plastic does not shatter and suits alkali solutions, which slowly etch glass. Amber, in glass or plastic, is for light-sensitive solutions such as silver nitrate or potassium iodide. Match the bottle to the reagent rather than using one type for everything.
Can hydrofluoric acid be stored in a glass reagent bottle?
No. Hydrofluoric acid attacks glass, dissolving the silica and weakening the bottle while contaminating the acid. It is kept in polyethylene or PTFE containers, and only by staff trained in its handling, because skin contact with it is especially dangerous.
How do I stop stock reagents from becoming contaminated?
Pour the amount needed into a clean beaker rather than dipping a pipette or spatula into the stock bottle, and never pour unused reagent back. Replace the stopper straight away, keep the stopper top-down on the bench or held in the hand, and label each bottle clearly.
Why has the stopper of my reagent bottle stuck?
Alkaline solutions can etch the ground glass and cement a glass stopper in place, and dried crystals in the neck do the same. Soaking the neck in warm water and twisting gently usually frees it. Keep alkalis in bottles with rubber or plastic closures to avoid the problem.
Last Updated: November 2026










Reviews
There are no reviews yet.